Kalmar ContChamp DRD S Series, Technical Handbook

Page: 51 / 298

ContChamp DRD-S
Technical Handbook
ECS
Terminal
19 S. Grupp 20
9407
04-10
58. Faulty analog signal from joystick.
All boom functions are interrupted.
Stop as soon as possible and contact service.
59. Faulty signal from sensor for end position damping
Contact service as soon as possible.
60. Faulty signal from twist-locks sensors.
Applies to both locked and unlocked position.
The signal from one or more sensors remains on for more
than 60 sec after unlocking of twist-locks.
Check that the contact pins can move freely up and down.
Contact service as soon as possible if the fault remains.
61. System fault.
Load curve is missing.
Stop as soon as possible and contact service.
62. Each one of the Module 60 errors will activate error menu 62.
When error menu 62 is activated:
Warning lamp on the ECS-terminal lights up
When pressing RESET:
Menu 62 starts blinking, 5 sec ON and 5 sec OFF
The hydraulic functions LIFT/LOWER and BOOM OUT/IN
are operative but at a lower speed.
58
59
60
61
62
50
50
-
60
60