KALATEL CBR-KB3, Installation And Operation Manual

Page: 29 / 38

Installation and Operation Manual
Revision B 5-7 0150-0133
Testing the Preset
Test the correct operation of the preset by moving the camera to a completely different view, and then
commanding the camera to return to the preset as follows:
1.
Press the PRESET key on
the keyboard one time.
The keyboard LCD
display shows:
GO TO PRESHOT
NUMBER ?
2.
Now press the number of
the preset just
programmed. The unit
should move to that view. The keyboard LCD
display shows:
Going to preshot
Clearing a preset
To clear an existing or previously programmed preset, please refer to the Receiver/Driver Manual of
the Receiver/Driver unit being used.
Set Preset/Go to Preset
1. When ALT is off, the setting number is from 01 to 16.
2. When ALT is on, the setting number is from 17 to 31.
3. The number 32 is used for preset 00.
The ALT KEY Examples:
a. Set the preset 07 of
camera 01:
b. Set the preset number 00
of camera 01:
c. Go to preset 00 of camera
01:
1. Turn off ALT . The
ALT LED should be
off.
1. Turn off ALT . The ALT
LED should be off.
1. Turn off ALT . The ALT
LED should be off.
2. Press key 1 to select
camera 01.
2. Press key 1 to select
camera 01.
2. Press key 1 to select
camera 01.
3. Press the preset key
twice.
3. Turn on ALT . The ALT
LED should be on.
3. Turn on ALT . The ALT
LED should be on.
4. The keyboard LCD
display shows:
Set Preshot Number?
4. Press the preset key
twice.
4. Press the Preset key
once.
5. Move the camera to
the desired position.
5. The keyboard LCD
display shows:
Set Preshot number?
5. The keyboard LCD
display shows:
Go to Preshot Number?
6. Press key 7 to set the
preset number 7 of
camera 01.
6. Move the camera to the
desired position.
6. Press key 16 (ALT is ON
for 32) to go to the preset
number 00 of camera 01.
7. Press key 16 (ALT is ON
for 32) to set the preset
number 00 of camera
01.
Table 3-4. The ALT KEY Examples.