KALATEL CBR-KB3, Installation And Operation Manual

Page: 27 / 38

Installation and Operation Manual
Revision B 5-5 0150-0133
If the chosen address is available for use, the display
shows:
(where
nn
is the chosen address)
Keyboard's ID set to nn ,
The bottom line of the display is updated to show the new keyboard address.
If the address is already in use, the display shows: That ID is
already in use
5.4 Other Available Keyboard Functions
Silencing the Keyboard Buzzer
The beeping or chirping sound made when the buttons are pressed on the keyboard can be silenced
at the user’s preference.
With the keyboard display showing:
Standing by . . .
or
Connected . . .
(32
→ →
01)
1.
Press the
#
button four (4) times until the display reads:
Buzzer on/off
1 = ON 2 = OFF
The buzzer can now be toggled by selecting ON (1) or OFF (2) as desired. Upon selection, the
keyboard returns to the ready state.
The top line of the display shows:
The middle and bottom line of the display shows:
(depending on the keyboard's connection status before
performing this operation)
Standing by ...
Connected ...
(32
→ →
01)
Selecting the Monitor Mode of Operation
With all other Kalatel units, there can only be a single keyboard connected at a time. But, with the
MMX-165C(x), there can be more than one keyboard connected, allowing control of the additional
monitors. This feature is implemented using the Monitor mode function described below.
The top line of the display shows:
The bottom line of the display shows:
Standing by ...
Connected ... (32
→ →
01)
1.
Press the
#
button three (3) times until the display
reads:
Monitor mode
press enter
2. Then press Enter .