KALATEL CBR-KB3, Installation And Operation Manual

Page: 28 / 38

Installation and Operation Manual
0150-0133 5-6 Revision B
The keyboard LCD display shows:
Monitor mode
multiplexer ID ?
1.
Enter the multiplexer ID
number for the multiplexer
whose monitors are to be
controlled.
The keyboard LCD display
shows:
( _ _ is the multiplexer ID
number)
Multiplexer
(_ _)
The keyboard LCD display
shows:
( _ _ is the multiplexer ID
number)
Monitor-B
(32 : _ _)
Using this method of connecting, the operator has available control of Monitors- B through E, but not
Monitor-A. The operator may switch between any of these monitors, calling up cameras, or having these
monitors sequence.
Control of Monitor-A, playback, or menu operation is limited to the keyboard connected using the method
described in section 9.0. In addition, the Main keyboard can override any command made by the Monitor
mode keyboards.
Upon pressing the
#
button again, the unit's display shows: Exiting
monitor mode
The keyboard will return to the ready state.
The top line of the display shows:
The bottom line of the display shows:
(depending on the keyboards connection status before
performing this operation)
Standing by ...
Connected ... (32
→ →
01)
Using presets
Setting a preset
Move the camera to the desired position using the arrow keys (KB3 keyboards), or the joystick (KB3/J
keyboards).
1.
Press the PRESET
key on the keyboard
one time.
The keyboard LCD display
shows:
GO TO PRESHOT
NUMBER ?
2.
Press the PRESET
key on the keyboard
again.
The keyboard LCD display
shows:
SET PRESHOT
NUMBER?
3.
Now enter the preset
number chosen.
The keyboard LCD display
shows:
(_ _ is the preshot number
chosen)
Setting Preshot
_ _