Full Digital Color Doppler Ultrasonic Diagnostic Instruments (Vet) User’s Manual V1.01
- 39 -
Rotate
Select
knob to highlight the [Gray Map] menu item, press
Select
knob item to confirmation
select [Gray Map] item, and then rotate
Select
knob to adjust it.
8.4.2.7 Adjusting the Chroma
Chroma is used to colorize the grayscale image.
Steps:
Move cursor to [Colorize] menu item and press
Set
key to select the color.
Rotate
Select
knob to highlight the [Colorize] menu item, press
Select
knob item to confirmation select
[Colorize] item, and then rotate
Select
knob to select the color.
8.4.2.8 Adjusting the Speckle Reduction
Speckle Reduction is used to clear the low frequency echo cause by noise.
Steps:
Move cursor to [Speckle Reduction] menu item and press
Set
key to adjust it.
Rotate
Select
knob to highlight the [Speckle Reduction] menu item, press
Select
knob item to
confirmation select [Speckle Reduction] item, and then rotate
Select
knob to adjust it.
8.4.2.9 Adjusting the Line Average
Line Average is used to average consecutive line to provide a smoother appearance with less noise.
Use lower line average values for fast-moving flow and higher line average values for smoother appearance.
Steps:
Move cursor to [Line Average] menu item and press
Set
key to adjust it.
Rotate
Select
knob to highlight the [Line Average] menu item, press
Select
knob item to confirmation
select [Line Average] item, and then rotate
Select
knob to adjust it.
8.4.2.10 Adjusting the Edge Enhance
Edge enhance is used to distinguish the image outline and optimize the smoothness of the image edge.
Steps:
Move cursor to [Edge Enhance] menu item and press
Set
key to adjust it.
Rotate
Select
knob to highlight the [Edge Enhance] menu item, press
Select
knob item to confirmation
select [Edge Enhance] item, and then rotate
Select
knob to adjust it.
8.4.2.11 Enabling/Disabling the Full-Screen Display
Full-screen display is used to display the image in full screen.
Steps:
Move cursor to [Full Screen] menu item and press
Set
key to adjust it.
Rotate
Select
knob to highlight the [Full Screen] menu item, press
Select
knob item to confirmation
select [Full Screen] item, and then rotate
Select
knob to adjust it.
8.4.2.12 Adjusting the Vertical Reverse
Vertical reverse is used to adjust two-dimensional image flip up/down.
Steps:
Move cursor to [Vertical Reverse] menu item and press
Set
key to adjust it.
Rotate
Select
knob to highlight the [Vertical Reverse] menu item, press
Select
knob item to
confirmation select [Vertical Reverse] item, and then rotate
Select
knob to adjust it.
8.4.2.13 Adjusting the Acoustic Power
Acoustic power is adjusted to increase or decrease the transmitting frequency of the probe.
Steps:
Move cursor to [A. Power] menu item and press
Set
key to adjust it.
Rotate
Select
knob to highlight the [A. Power] menu item, press
Select
knob item to confirmation select
[A. Power] item, and then rotate
Select
knob to adjust it.
