Fig. 4 Recommended machine placement and dimensions [mm]
A
Exhaust fan
Z
Air inlet aperture
1.
NOTICE!
Ambient temperature too low!
➤ Make sure that the temperature of the machine is at least +3 °C before starting.
➤ Heat the machine room adequately or install a standstill heater.
2. Ensure accessibility and adequate lighting so that all work on the machine can be carried out
without danger or hindrance.
3. If installed outdoors, the machine must be protected from frost, direct sunlight, dust and rain.
If the machine is installed together with other plant (compressors, refrigeration dryers, etc.),
then under no circumstances may hot cooling air from other plant be directed to the cooling
air inlet end of the compressor.
Hot air can cause damage to the machine.
5.2.2 Ensuring the machine room ventilation
Adequate ventilation of the machine room fulfils several functions:
■ It prevents a vacuum in the machine room.
■ It evacuates the exhaust heat of the machine and thus ensures the required operating condi‐
tions.
➤ Consult KAESER if you cannot ensure the conditions for adequate ventilation of the ma‐
chine room.
1. Ensure that the flow rate of fresh air is at least the same as the flow rate taken by the machine
and exhaust fan from the machine room.
2. Make sure that the machine and exhaust fan can only operate when the air inlet aperture is
actually open.
5
Installation and Operating Conditions
5.2
Installation conditions
28
Operator manual Reciprocating compressor
KCT blue T
No.: 902350 00E
Summary of Contents for KCT blue T Series
Page 2: ...Original instructions KKW PDENT 2 10 en SBA DENTAL T ANLAGE 20190503 092636...
Page 6: ...Contents iv Operator manual Reciprocating compressor KCT blue T No 902350 00E...
Page 8: ...List of Illustrations vi Operator manual Reciprocating compressor KCT blue T No 902350 00E...
Page 10: ...List of Tables viii Operator manual Reciprocating compressor KCT blue T No 902350 00E...
