KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82, Manual, Page: 93 / 418

Share

Page: 93 / 418

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Manual Download Page 93

Shut-down sequence

Fig. 29 Brief instructions on stopping procedure

➤ Open the instrument panel cover and follow the brief instructions on the stopping procedure at‐

tached at the inside.

The individual steps are fully explained below.

8.2.2 Commissioning the machine

Notes concerning snow and ice

Considerable snow or ice may build up on the machine under low temperature conditions.
➤ Remove any snow and ice from the machine before operating.
As a safety measure, check the function of the «EMERGENCY STOP» push button.
1.

«EMERGENCY STOP» push button locked out.

The machine cannot be stopped quickly in an emergency.
➤ Check the function of the «EMERGENCY STOP» push button.
➤ Do not operate the machine if the «EMERGENCY STOP» push button does not work.

2. Push the «EMERGENCY STOP» push-button.

The «EMERGENCY STOP» push-button cannot be pressed or does not engage: Defrost the

«EMERGENCY STOP» push-button.

3. Disengage the «EMERGENCY STOP» push-button again.

The «EMERGENCY STOP» push-button still does not function after defrosting.
➤ Have the «EMERGENCY STOP» push-button replaced.

8

Operation

8.2

Starting and stopping

No.: 901783 08 USE

Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART

79

«
...
91
92
93
94
95
...
»

Summary of Contents for SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Reviews:

No comments