2 Technical Data
2.1 Nameplate
The machine's nameplate provides the model designation and important technical information.
The nameplate is located on the outside of the machine (see illustration in chapter 13.1).
➤ Enter the nameplate data here as a reference:
Feature
Value
Vehicle Identification No.
Permissible total weight
Permissible coupling load
Permissible axle load
Portable compressor
Part no.
Serial no.
Year of manufacture
Total weight
Lifting point load capacity
Rated engine power
Engine speed
Maximum working pressure
Tab. 3 Nameplate
2.2 Vehicle identification number
The vehicle identification number (VIN) is the only unmodifiable and therefore the most important
identification feature on the machine.
The vehicle identification number remains associated with the machine throughout the entire dura‐
tion of its service life. The vehicle identification number is stamped into the bodywork of the ma‐
chine.
Further information For the location of the VIN stamp, see chapter 13.1.
2.3 Options – options label
A list of the options fitted to your machine helps to relate the information in this operating manual.
Options fitted to the machine are listed on the options label (code letters).
The nameplate is to be found:
■ on the outside of the machine,
■ on the front (see chapter 13.1)
The following table lists all possible options.
Only the codes for those options fitted appear on the nameplate.
2
Technical Data
2.1
Nameplate
4
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART
No.: 901783 08 USE