KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82, Manual, Page: 45 / 418

Share

Page: 45 / 418

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Manual Download Page 45

➤ Operate the machine only in technically sound condition.
➤ Carry out regular inspections:

■ for visible damage and leakage,
■ of safety devices,
■ of the EMERGENCY STOP device,
■ of parts needing monitoring.

➤ Pay particular attention to cleanliness during all maintenance and repair work. Cover compo‐

nents and openings with clean cloths, paper or tape to keep them clean.

➤ Do not leave any loose components, tools or cleaning rags on or in the machine.
➤ Components removed from the machine can still be dangerous.

Do not attempt to open or destroy any components taken from the machine.

➤ Self-locking nuts removed for the installation must not be reused but replaced by new nuts, be‐

cause the non-positive safety is no longer ensured.

➤ Use only suitable compressed air hoses.

Compressed air hoses must meet the following requirements:
■ they are of the right type and size for the highest permissible machine working pressure,
■ they are not damaged, worn or of reduced quality,
■ they have couplings and connections of the right type and size.

➤ Wear protective gloves when connecting or disconnecting compressed air hoses.
➤ Make sure compressed air hoses are de-pressurised before disconnecting from the machine.
➤ Secure the open end of an air hose before applying air pressure. An unsecured hose may whip

and cause injury.

➤ At working pressures >100 psi, compressed air hoses should be secured by a cable to their

respective outlet valves.

➤ Connect and operate only suitable air tools.

■ The air tools must meet the set output pressure of the machine.
■ Use a pressure reducer for air tools requiring a lower pressure.
■ Use compressed air tools only with the pressure appropriate for its purpose (tool working pres‐

sure).

3.5.2.4 De-commissioning, storage and disposal

Improper handling of old operating fluids and components represent a danger for the environment.
➤ Drain off fluids and dispose of them according to environmental regulations.

These include, for example, fuel, engine oil and compressor cooling oil and engine coolant.

➤ Dispose of the machine in accordance with local environmental regulations.

3.5.3 Organizational Measures

➤ Designate personnel and their responsibilities.
➤ Give clear instructions on reporting faults and damage to the machine.
➤ Give instructions on fire reporting and fire-fighting measures.

3

Safety and Responsibility

3.5

Dangers

No.: 901783 08 USE

Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART

31

«
...
43
44
45
46
47
...
»

Summary of Contents for SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Reviews:

No comments