blueplanet hybrid 10.0
Page 62
10.3
Disassembling the device
CAUTION
Risk of injury from improper lifting and transport
If the device is lifted improperly, it can tilt and result in a fall.
› Always lift the device vertically.
› Use a climbing aid for the chosen installation height.
› Wear protective gloves and safety shoes when lifting and lowering the device.
The device has been switched off and uninstalled.
1.
Remove both countersunk screws [ A_2.5] on the left and right side of the cover to secure it against
being lifted off.
2.
Move the bottom part of the device away from the wall at an angle of about 30°.
3.
Disengage it from the wall bracket at the top.
Fig. 66: Tilt the device 30° and disengage it from the wall bracket.
10.4
Packaging the device
Device has been uninstalled.
1.
If possible, always pack the device in the original packaging. If this is no longer available, an alternative is to use
equivalent packaging.
2.
You must be able to close the box completely and it must be able to accommodate the weight and size of the device.
10.5
Storing the device
CAUTION
Property damage as a result of condensation
Faulty storage can form condensate in the device and impair the device functioning (e.g. storage outside
the ambient conditions or temporary relocation from a cold to a hot environment).
›
environmental data (see chapter 4.3)
Device packaged.
1.
Store the device in a dry place according to the
EN
Screw connection
