blueplanet hybrid 10.0 TL3
Page 49
8.3.6
Warning display
The measurements that lie outside the operating limits are displayed flashing.
As an example: If the voltage on the solar generator has not yet reached the switch-on limit, the PV voltage is
displayed flashing.
Fig. 59: F
lashing display
8.4
Update
During the update, sufficient sunlight must be ensured. The device is restarted after the update, requiring sufficient PV
power for this purpose.
CAUTION
No PV power
If no PV power is available, deactivating the battery can cause the device to shut down
completely.
›
Reactivation is only possible when the PV modules once again provide enough power to turn on the
system.
When updating the COM
Fig.
60
:
Symbol when
updating the COM
COM update
When updating the control
Fig.
61
:
Symbol when
updating the control
Control update
When updating the hy-
switch
Fig.
62
:
Symbol when
updating hy-switch
hy-switch update
EN
UPV1, UPV2
(flashing)
