10
BASE MODULE - FUNCTIONS
FRONT BUTTONS
(0) AF•EXIT
autofocus • exit
PRESS: exit from the current function, if inside Digital Zoom Position change axis.
HOLD: perform AutoFocus / Metering while holding button. Release to stop.
(1) LV•DZ•DZP
liveview • digital zoom • digital zoom
position
PRESS: digital zoom - on every press cycle thru 5x,10x,1x (normal)
HOLD: go in LiveView, hold again to deactivate. If you are not in LiveView, an
unique press activate it. The camera focusing moves only in LiveView, and also
all movie recording features (Canon specific features).
LONG HOLD: zoom area movement, rotating the knob you can move on the X
axis. Push EXIT button to switch to Y axis movement, rotate the knob to go to
position. Pushing once EXIT cycles you thru X and Y axis. Once you found the
correct position, just press the button again to exit the function.
(2) ISO•EXP
iso • exposure compensation
PRESS: iso change, rotate knob to change values, press again to exit
HOLD: exposure change, rotate knob to change values, press to exit
1
2
3
4
6
7
8
9
10
0
5
11
