19
STATUS LED - REMOTE MODULE
Once the remote module is turned on, the software automatically check for a
valid Base Module on the same Radio ID, if one is found the main led start to
reflect the same state of the Base Module. If no wireless base module is found,
the unit blink red.
status led
WIRELESS CONNECTING TO BASE MODULE
When base module is in range, the Remote Module’s red led stops blinking and
become of the same color combination of the base module. If the signal is lost,
the base unit keeps operating while the remote needs to get in range again,
and automatically link again to the base.
no wireless base module
found
steady when normal
operation
steady while movie
recording
short blink every 5 sec.:
recharge battery
short green/off blink while
pulling focus or pressing BWD,
FWD
short
short
short
long
3 fast red blinks and 1 slow
green blink: no camera
detected
