manualshive.com logo in svg

JVC RX-D701S, Instructions Manual

The JVC RX-D701S is a versatile audio receiver that delivers exceptional sound quality. With its advanced features and user-friendly interface, this receiver is perfect for any audio enthusiast. Explore and troubleshoot the device easily with our free downloadable manual, complete with detailed schematic diagrams, available at manualshive.com.

Share
Download
background image

18

Now PC is ready for playback through the USB connection.

After installation is completed, you can use your PC as the
playback source.  The PC automatically recognizes the receiver
whenever the transmitter is connected to the PC or the USB cable
is connected between the PC and the receiver while the receiver
is turned on.
• When not using the PC as the playback source, disconnect the

transmitter or the USB cable.

To play back sounds on the PC,

 refer to the manuals supplied

with the sound reproduction application installed in the PC. Start
the application after the USB device is recognized.

When playing back with USB WIRELESS,

connect the transmitter and aim the transmitter at the antenna. If
any obstacles are in between, playback will be interrupted or the
wireless communication will be canceled.

If noise comes during playback or playback is interrupted
with USB WIRELESS,

 try measures below:

– press CHANNEL on the transmitter to search for another

frequency. Each time you press CHANNEL, the frequency
advances one channel up from CH 1 up to CH 13.

– press and hold CHANNEL for more than three seconds to make

sure the transmitter detects the best frequency automatically.

How to install the USB drivers

The following procedure is described using the English version of
Windows

R

 XP.  If your PC is running on a different version of

operation system  in a different language, the screens shown on
your PC's monitor will differ from the ones used in the following
procedure.

The following procedure is applied both to USB WIRELESS and
USB TERMINAL.

1

The USB drivers are installed automatically.

• If the USB drivers are not installed automatically, install the

USB drivers by following the instructions on the PC’s
monitor.

2

Check if the drivers are correctly installed.

1. Open the Control Panel on your PC:

Select [Start] 

=

 [Control Panel].

2. Select [System] 

=

 [Hardware] 

=

 [Device Manager] 

=

[Sound, video and game controllers] 

=

 [Universal Serial

Bus controllers].

• The following window appears, and you can check whether

the drivers are installed.

If no sound comes from the speakers, check the following
items:

For both USB WIRELESS and USB TERMINAL
– check the USB device is recognized properly.
– check the playback software in your PC is compatible with the

USB device.

– open the Control Panel on your PC, select [Sounds and Audio

Devices] 

=

 [Audio] tab 

=

 [Sound playback] 

=

 [Default device],

and check [Default device] is set to [USB Audio device].

For USB WIRELESS
– select “USB WIRELESS” as the source.
– connect the USB wireless transmitter correctly with the USB

WIRELESS switch on the receiver “ON.”

– keep proper distance between the receiver and your PC.
– check the ID lamp on the transmitter and the signal indicators

“L” and “R” on the display light up.

For USB TERMINAL
– select “USB TERMINAL” as the source.
– connect the USB cable correctly.

NOTES

• DO NOT turn off the receiver or disconnect the transmitter or

the USB cable while installing the drivers and for several
seconds while your PC is recognizing the receiver.

• If your PC does not recognize the receiver, disconnect the

transmitter or the USB cable and connect it again. If it does not
work yet, restart Windows.

• The installed drivers can be recognized only when the

transmitter is connected to your PC or the USB cable is
connected between the receiver and your PC.

• The sound may not be played back correctly—interrupted or

degraded—due to your PC settings and PC specifications.

• In case that the transmitter has an influence on the wireless

systems (based on IEEE 802.11b/11g, the cordless telephone,
and the microwave oven), try measures below:
– press CHANNEL on the transmitter to search for another

frequency. Each time you press CHANNEL, the frequency
advances one channel up from CH 1 up to CH 13.

– press and hold CHANNEL for more than three seconds to

make sure the transmitter detects the best frequency
automatically.

– to keep the distance between the transmitter and the LAN

antenna utilize the supplied extension cord.

• Use a USB cable (version 1.1 or later). Recommended cord

length is 1.5 m.

* Microsoft

®

, Windows

®

 98 SE, Windows

®

 Me, Windows

®

 2000,

and Windows

®

 XP are registered trademarks of Microsoft

corporation.

16-18RX-D702B[UJ].p65

05.9.9, 4:50 PM

18

Summary of Contents for RX-D701S











































































































































































































































Reviews:

No comments

Related manuals for RX-D701S

CAME BPT OPALE User Manual preview
OPALE
Brand: CAME BPT Pages: 48
Akai CT-1421ANF Instruction Manual preview
CT-1421ANF
Brand: Akai Pages: 33
Denon AVR-989 Brochure & Specs preview
AVR-989
Brand: Denon Pages: 2
Icom UltraTech IC-F4GT-4 User Manual preview
UltraTech IC-F4GT-4
Brand: Icom Pages: 17
Ocean Signal ATB1 User Manual preview
ATB1
Brand: Ocean Signal Pages: 28
Aiwa Z-L500 Service Manual preview
Z-L500
Brand: Aiwa Pages: 37
Aiwa CDC-X427 Operating Instructions Manual preview
CDC-X427
Brand: Aiwa Pages: 9
Onkyo CR-505DAB Instruction Manual preview
CR-505DAB
Brand: Onkyo Pages: 40
Echelon LonWorks LPT-11 User Manual preview
LonWorks LPT-11
Brand: Echelon Pages: 76
D+M Group AVR-E400 Instructions Manual preview
AVR-E400
Brand: D+M Group Pages: 19
Yaesu FT-991 Setup preview
FT-991
Brand: Yaesu Pages: 3
AudioSonic CD-571 Instruction Manual preview
CD-571
Brand: AudioSonic Pages: 76
Marantz SR5005 (French) Manuel D'Utilisation preview
SR5005
Brand: Marantz Pages: 91
Pyle PLCD58MP3 Owner'S Manual preview
PLCD58MP3
Brand: Pyle Pages: 4
Boss Audio Systems BV8975B User Manual preview
BV8975B
Brand: Boss Audio Systems Pages: 22
JRC JST-100 Instruction Manual preview
JST-100
Brand: JRC Pages: 58
QuanSheng TG-UV2 User Manual preview
TG-UV2
Brand: QuanSheng Pages: 37
Pyle PLMRKT33 Owner'S Manual preview
PLMRKT33
Brand: Pyle Pages: 14

Brands by name

Popular brands

Load more brands