manualshive.com logo in svg

JVC RX-D701S, Instructions Manual

The JVC RX-D701S is a versatile audio receiver that delivers exceptional sound quality. With its advanced features and user-friendly interface, this receiver is perfect for any audio enthusiast. Explore and troubleshoot the device easily with our free downloadable manual, complete with detailed schematic diagrams, available at manualshive.com.

Share
Download
background image

44

Using the Surround/DSP modes

Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. See the table below.
• The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of the

surround channels. For example, (3/2) indicates that the signals are encoded with three front signals (left/right/center) and two (stereo)
surround signals.

• For EX/ES/PLIIx setting, see page 30.
• Surround/DSP modes are not available when selecting “A MULTI” in the audio input setting (see page 20) or when multi channel PCM

(see page 42) signals recorded in DVD-Audio are coming in.

EX/ES/PLIIx setting

AUTO

ON

PLIIx MOVIE

PLIIx MUSIC

OFF

Dolby Digital Surround EX

DOLBY D EX

*

3,5

DOLBY D EX

*

3

 D+PLIIx MOVIE

*

2,3

 D+PLIIx MUSIC

*

3

DOLBY DIGITAL

Dolby Digital (3/2, 2/2)

DOLBY DIGITAL

DOLBY D EX

*

3

 D+PLIIx MOVIE

*

2,3

 D+PLIIx MUSIC

*

3

DOLBY DIGITAL

Dolby Digital (3/1, 2/1, 3/0, 1/0)

DOLBY DIGITAL

Dolby Digital (Dual Mono)

DUAL MONO

DTS-ES Discrete

*

1

DTS-ES DSCRT

*

3

DTS-ES DSCRT

*

3

DTS+PLIIx MOVIE

*

2,3

DTS+PLIIx MUSIC

*

3

DTS SURROUND

DTS-ES Matrix

*

1

DTS-ES MATRIX

*

3

DTS-ES MATRIX

*

3

DTS+PLIIx MOVIE

*

2,3

DTS+PLIIx MUSIC

*

3

DTS SURROUND

DTS (3/2, 2/2)

*

1

DTS SURROUND

DTS+NEO:6

*

3

DTS+PLIIx MOVIE

*

2,3

DTS+PLIIx MUSIC

*

3

DTS SURROUND

DTS (3/1, 2/1, 3/0, 1/0)

DTS

DTS (Dual Mono)

DUAL MONO

Incoming Signal  Type

PLIIx MOVIE

*

4

/

PLIIx MUSIC

*

4

/

PLIIx GAME

*

4

/

NEO:6 CINEMA/

NEO:6 MUSIC

Analog/LINEAR PCM

Dolby Digital (2/0)

Dolb

y Digital

DTS

*

1

DTS 96/24 processing is not applied when the EX/ES/PLIIx setting is activated. If you want to apply the processing, set the EX/ES/
PLIIx setting to “OFF” (see page 30).

*

2

When “S BACK OUT” is set to “SB OUT: 1SPK,” 

 D+PLIIx MOVIE is changed to DOLBY D EX and DTS+PLIIx MOVIE is changed to

DTS+

 EX.

*

3

When “S BACK SPK” is set to “NO,” Virtual Surround Back is activated for the modes and the VIRTUAL SB indicator lights up on the
display.

*

4

When “S BACK SPK” is set to “NO,” PLllx MOVIE, PLllx MUSIC, and PLllx GAME are changed to PLll MOVIE, PLll MUSIC, and PLll
GAME respectively.

*

5

For some Dolby Digital Surround EX software, Dolby Digital 5.1-channel reproduction (“DOLBY DIGITAL”) may be applied even
though you have selected “AUTO”. In this case, select “ON”

 

to apply

 

“DOLBY D EX.”

Virtual Surround Back

This function creates the great surround effect from the behind as if you have connected the surround back speaker. The VIRTUAL
SB (Surround Back) indicator lights up on the display.
If you have connected (and activated) the surround speakers, you can use Virtual Surround Back without connecting the surround
back speaker.
Virtual Surround Back is activated when EX/ES/PLIIx is set to other than “OFF” and when playing back the software including the
following signals:

– Dolby Digital Surround EX
– DTS-ES
– Dolby Digital or DTS with 4-channels or more

About the DSP modes

• The following DSP modes are available except when selecting “A MULTI” in the audio input setting (see page 20) or when multi

channel PCM (see page 42) signals recorded in DVD-Audio are coming in.
HALL1, HALL2, LIVE CLUB, DANCE CLUB, PAVILION, THEATER1, THEATER2

• If an incoming signal is a multi-channel (more than 2 channel) digital signal, “MONO FILM” is not available.
• If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is not available.

PLII MOVIE/

PLII MUSIC/

PLII GAME/

NEO:6 CINEMA/

NEO:6 MUSIC

41-45RX-D702B[J]_f.p65

05.8.25, 1:05 PM

44

Summary of Contents for RX-D701S











































































































































































































































Reviews:

No comments

Related manuals for RX-D701S

Majestic 90 Instructions For Care And Operation preview
90
Brand: Majestic Pages: 9
FTE Maximal MAX S123 HD Quick Installation Manual preview
MAX S123 HD
Brand: FTE Maximal Pages: 44
Jensen VM8013HD - Screen MultiMedia Receiver Quick Start Manual preview
VM8013HD - Screen MultiMedia Receiver
Brand: Jensen Pages: 3
Network Technologies Incorporated ST-C64K9GB-R-HDBT Operation Manual preview
ST-C64K9GB-R-HDBT
Brand: Network Technologies Incorporated Pages: 10
Icom IC-F11/Sl IC-F21/S Instruction Manual preview
IC-F11/Sl IC-F21/S
Brand: Icom Pages: 32
Spektrum AR12020 User Manual preview
AR12020
Brand: Spektrum Pages: 72
jetvision.de Radarcape User Manual preview
Radarcape
Brand: jetvision.de Pages: 24
Icom C-F43GS Instruction Manual preview
C-F43GS
Brand: Icom Pages: 48
Quantek C Prox WAVE500-2B Manual preview
C Prox WAVE500-2B
Brand: Quantek Pages: 4
Xilinx Varium C1100 Installation Manual preview
Varium C1100
Brand: Xilinx Pages: 26
Xoro HRS 8500 User Manual preview
HRS 8500
Brand: Xoro Pages: 106
REI WHD-PRO100 Manual preview
WHD-PRO100
Brand: REI Pages: 6
StarTech.com ST12MHDLANUR Instruction Manual preview
ST12MHDLANUR
Brand: StarTech.com Pages: 10
JB Systems HF-TWIN Opeartion Manual preview
HF-TWIN
Brand: JB Systems Pages: 12
Harman Kardon AVR 355/230 Service Manual preview
AVR 355/230
Brand: Harman Kardon Pages: 125
Curtis PR-28 User Manual preview
PR-28
Brand: Curtis Pages: 1
Hughes HX System System Overview preview
HX System
Brand: Hughes Pages: 106
Bodet Lockdown Alert System Installation And User Manual preview
Lockdown Alert System
Brand: Bodet Pages: 15

Brands by name

Popular brands

Load more brands