manualshive.com logo in svg

JVC RX-D701S, Instructions Manual

The JVC RX-D701S is a versatile audio receiver that delivers exceptional sound quality. With its advanced features and user-friendly interface, this receiver is perfect for any audio enthusiast. Explore and troubleshoot the device easily with our free downloadable manual, complete with detailed schematic diagrams, available at manualshive.com.

Share
Download
background image

2

English

Table of Contents

Parts identification ................................................ 3
Getting started ...................................................... 6

Before Installation .................................................................. 6
Checking the supplied accessories ....................................... 6
Putting batteries in the remote control ................................... 6
Connecting the FM and AM antennas ................................... 7
Connecting the speakers ....................................................... 8
Connecting video components .............................................. 9
Connecting the power cord .................................................. 16
USB connection ................................................................... 17

Basic operations ................................................. 19

1 Turn on the power ............................................................ 19
2 Select the source to play .................................................. 19
3 Adjust the volume ............................................................ 20
Selecting the digital decode mode ....................................... 21
Turning off the sounds temporarily ...................................... 21
Changing the display brightness .......................................... 21
Turning off the power with the Sleep Timer ......................... 22
Making sounds natural ......................................................... 22

Basic settings ...................................................... 23

Setting the speaker information automatically

—Smart Surround Setup ............................................... 23

Basic setting items ............................................................... 25
Operation through on-screen display menus ....................... 25

Menu operation buttons ................................................... 25
Setup menu configuration ............................................... 26

Menu operating procedure ................................................... 27
Setting the items .................................................................. 28

Setting the speakers ....................................................... 28
Activating the EX/ES/PLIIx setting—EX/ES/PLIIx ........... 30
Selecting the main or sub channel—DUAL MONO ......... 30
Setting bass sound .......................................................... 30
Using the Midnight mode—MIDNIGHT ........................... 31
Setting the digital input (DIGITAL IN) terminals

—DIGITAL IN 1/2/3 ................................................... 31

Setting the Audio delay level—AUDIO DELAY ................ 31
Memorizing the volume level for each source

—ONE TOUCH OP ................................................... 32

Selecting the source for HDMI terminal and COMPONENT

VIDEO jacks—HDMI SELECT/CMPNT SELECT ..... 32

Selecting the output video signals—VIDEO OUTPUT .... 32
Superimposing the menus—SUPERIMPOSE ................ 32

Sound adjustments ............................................. 33

Basic adjustment items ........................................................ 33
Operation through on-screen display menus ....................... 33

Menu operation buttons ................................................... 33
Setup menu configuration ............................................... 34

Menu operating procedure ................................................... 35
Adjusting the items .............................................................. 36

Adjusting the speaker output levels ................................. 36
Adjusting the equalization patterns

—DIGITAL EQ 63Hz/250Hz/1kHz/4kHz/16kHz ........ 37

Adjusting the bass sounds .............................................. 37
Adjusting the sound parameters for the

Surround/DSP modes ............................................... 37

Tuner operations ................................................. 39

Tuning in to stations manually .............................................. 39
Using preset tuning .............................................................. 39
Selecting the FM reception mode ........................................ 40

Creating realistic sound fields ........................... 41

Reproducing theater ambience ........................................... 41
Introducing the Surround modes ......................................... 41
Introducing the DSP modes ................................................. 43
Using the Surround/DSP modes ......................................... 44
Activating the Surround/DSP modes ................................... 45

AV COMPU LINK remote control system .......... 46
Operating other JVC products ........................... 48
Operating other manufacturers’ products ........ 50
Troubleshooting .................................................. 53
Specifications ...................................................... 55

01-08RX-D702B[C]_f.p65

05.9.14, 1:40 PM

2

Summary of Contents for RX-D701S











































































































































































































































Reviews:

No comments

Related manuals for RX-D701S

Eclipse CD1200 Handy Reference Manual preview
CD1200
Brand: Eclipse Pages: 101
Eclipse CD1200 Installation Manual preview
CD1200
Brand: Eclipse Pages: 8
Salora Boston Instructions For Use Manual preview
Boston
Brand: Salora Pages: 7
Icom IC-F3061T Servise Manual preview
IC-F3061T
Brand: Icom Pages: 48
Phonak ActiveVent Cleaning And Care Instructions preview
ActiveVent
Brand: Phonak Pages: 4
Teac CR-H238I Owner'S Manual preview
CR-H238I
Brand: Teac Pages: 44
Icom ic-F3162DT/DS Instruction Manual preview
ic-F3162DT/DS
Brand: Icom Pages: 40
Cambridge Audio AXR85 Operating Instructions Manual preview
AXR85
Brand: Cambridge Audio Pages: 27
Mutant MT2300BT Operating And Installation Manual preview
MT2300BT
Brand: Mutant Pages: 40
F&U MPF3385 User Manual preview
MPF3385
Brand: F&U Pages: 23
Nakamichi SR-2A Service Manual preview
SR-2A
Brand: Nakamichi Pages: 56
VPC i2 MX Series User Manual preview
i2 MX Series
Brand: VPC Pages: 2
ENFORCER EB-P104-01Q Installation Manual preview
EB-P104-01Q
Brand: ENFORCER Pages: 8
Xantech HDRXSG01 Installation Instructions preview
HDRXSG01
Brand: Xantech Pages: 4
Icom IC-706MKII Programming Manual preview
IC-706MKII
Brand: Icom Pages: 2
Small Wonder Labs PSK-40 Instructions Manual preview
PSK-40
Brand: Small Wonder Labs Pages: 26
Blaupunkt ACS 2501 Owner'S Record preview
ACS 2501
Brand: Blaupunkt Pages: 8
IMG STAGELINE 24.2820 Instruction Manual preview
24.2820
Brand: IMG STAGELINE Pages: 24

Brands by name

Popular brands

Load more brands