manualshive.com logo in svg

JVC RX-D701S, Instructions Manual

The JVC RX-D701S is a versatile audio receiver that delivers exceptional sound quality. With its advanced features and user-friendly interface, this receiver is perfect for any audio enthusiast. Explore and troubleshoot the device easily with our free downloadable manual, complete with detailed schematic diagrams, available at manualshive.com.

Share
Download
background image

9

Connecting video components

Do not connect the AC power plug to the wall outlet until all connections are completed.

Video conversion function

This receiver can convert the video signals output from video components. The chart below shows which video signals can be converted
into which signals by video conversion.

Converted video signals available vary depending on each source component. See also pages 10 to 15 for details.

NOTES

• HDMI signals cannot be converted into other video signals.
• With input video signals converted into HDMI signals, the playback picture may be distorted when you change the playback mode

(fast-forward, rewind, or pause, for example).

To use the video conversion function, you need to make the two
settings below when you finish connecting your TV and video
components.

VIDEO OUTPUT:

Select the settings according to the
connection method for your TV. See
page 32 for details.

VIDEO INPUT:

Select the settings according to the
connection method for your video
components. This setting is memorized
for each source. See pages 11 to 15 and
20 for details.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound
output through this receiver may be distorted.

Video Input                    Converted                    Video Output

CMPNT (component)

S (S-video)

C (composite)

CMPNT (component)

S (S-video)

C (composite)

HDMI

HDMI

Before connecting video components

Before connecting video components, note the folllowing below.

IMPORTANT:

The HDMI video signals from the HDMI terminal are transmitted only through the HDMI MONITOR OUT terminal.

Therefore, if the TV is connected to the receiver through the VIDEO jack (MONITOR OUT), S-VIDEO jack (MONITOR OUT), or
COMPONENT VIDEO jacks (MONITOR OUT) and a playing video component is connected to the receiver through the HDMI terminal
(VCR (DBS) IN or DVR/DVD IN), you cannot view the playback picture on the TV.

NOTES

• When playing back audio and video with the HDMI connection, the HDMI lamp on the front panel lights up.
• Set the audio input setting to “HDMI” when you enjoy sound with the HDMI connection. See “Selecting the audio input setting” on page

20.

• When connecting a VCR or DBS to HDMI VCR (DBS) IN terminal, select “HDMI SELECT” (see page 32) correctly according to the

component you connect. If you do not, you cannot view the playback picture on the TV.

• By using a HDMI-DVI conversion cable, you can connect the source components or the TV with DVI output. When connecting those

components or TV, change the audio input setting to the setting other than “HDMI.” (See page 20.)

• This receiver is compatible with standard video formats. If non-standard video formats are coming in, the picture may not appear

properly on TV.

• The picture on the TV may not be the same aspect ratio as the ratio set on the source components.
• When connecting a TV to this receiver with an HDMI cable, the sound coming into this receiver is not transmitted to the speakers of the

TV. You can enjoy sound only from the speakers connected to this receiver.

• When connecting a TV to this receiver with an HDMI cable, turning a source component on or off, or changing the audio or video input

setting of this receiver frequently may cause a noise or interrupt the sound and picture. In this case, turn the receiver off and turn it on
again.

• When enjoying multi channel PCM sound with the audio input setting set to “HDMI” (see page 20), some functions are not available.

See page 12 for details.

• When you enjoy HDCP contents, sound and picture may not be transmitted to the speakers and TV for a few seconds in the beginning

for confirmation.

09-15RX-D702B[UJ]_f.p65

05.9.9, 4:50 PM

9

Summary of Contents for RX-D701S











































































































































































































































Reviews:

No comments

Related manuals for RX-D701S

HAMTRONICS R100 Assembly, Installation, & Maintenance preview
R100
Brand: HAMTRONICS Pages: 11
NAD 3240PE Specifications preview
3240PE
Brand: NAD Pages: 2
Masterplug ARCDKG Quick Manual preview
ARCDKG
Brand: Masterplug Pages: 2
Clarion NX405 Owner'S Manual preview
NX405
Brand: Clarion Pages: 162
Samson AG300 Owner'S Manual preview
AG300
Brand: Samson Pages: 24
Vauxhall Antara Infotainment Manual preview
Antara
Brand: Vauxhall Pages: 137
Boss Audio Systems BV9371BD User Manual preview
BV9371BD
Brand: Boss Audio Systems Pages: 23
Denon DRA-685 Operating Instructions Manual preview
DRA-685
Brand: Denon Pages: 56
X2 Digital Wireless Systems XDS95 User Manual preview
XDS95
Brand: X2 Digital Wireless Systems Pages: 12
Ten-Tec Pegasus 550 Operator'S Manual preview
Pegasus 550
Brand: Ten-Tec Pages: 42
Cabletron Systems FOT-F3 User Manual preview
FOT-F3
Brand: Cabletron Systems Pages: 41
iSimple DUALINK PGHVW2 Owner'S Manual preview
DUALINK PGHVW2
Brand: iSimple Pages: 12
AKK Technology Diversity RX User Manual preview
Diversity RX
Brand: AKK Technology Pages: 5
Audiovox VME9020TS Manual & Warranty preview
VME9020TS
Brand: Audiovox Pages: 78
Strong SRT 7000 User Manual preview
SRT 7000
Brand: Strong Pages: 25
Boss Audio Systems BE10ACP User Manual preview
BE10ACP
Brand: Boss Audio Systems Pages: 41
ActionTec WirelessTV Quick Start Manual preview
WirelessTV
Brand: ActionTec Pages: 2
Icom IC-706MKII Programming Manual preview
IC-706MKII
Brand: Icom Pages: 2

Brands by name

Popular brands

Load more brands