JVC RX-D411S - AV Receiver, Instructions Manual

Page: 112 / 117

English
To change the transmittable signals for operating a VCR
1
Press and hold VCR .
• Keep the button pressed until step
3
is finished.
2
Press VCR.
3
Enter the manufacturer code using the
numeric buttons (1 – 9, 0).
See “Manufacturer codes for VCR” on the right.
4
Release VCR .
Now, you can perform the following operation on the VCR:
VCR :
Turn on or off the VCR.
After pressing VCR, you can perform the following
operations on the VCR:
C/–: Change the TV channel numbers on
the VCR.
1 – 10, 0,
h
10: Select the TV channel numbers on
the VCR.
3
: Start playback.
7
: Stop playback.
8
: Pause playback. To release it, press
3
.
¡
: Fast-forward a tape.
1
: Rewind a tape.
See the manual supplied with the VCR for details.
5
Try to operate your VCR by pressing VCR
.
Your VCR turns on or off when you have entered the
correct code.
If more than one code is listed for your brand of VCR, try
each one until the correct one is entered.
Manufacturer codes for VCR:
Manufacturer Codes
JVC 01, 02, 03, 04
Aiwa 05
Akai 06, 07, 08
Bell+Howell 09
Daewoo 10
Emerson 11, 12, 13, 14, 15
Fisher 16, 17, 18, 19
G.E. 20, 21
Go Video 22
Gold Star 23
Go-Video A 24
Go-Video B 25
Hitachi 20, 26
Magnavox 27, 28, 29
Mitsubishi 30, 31, 32, 33
NEC 34, 35
Panasonic 36, 37
Philips 27
RCA 38
Samsung 39, 40, 41
Sanyo 16, 17, 18, 19
Scott 42
Sharp 43, 44
Shintom 45
Sony 46, 47, 48, 49, 50, 51
Symphonic 52
Teknica 53, 54
Toshiba 55
Zenith 56
Initial setting: 01
Manufacturer codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
50
45-54_Others.indd 50 45-54_Others.indd 50 06.6.5 5:30:28 PM 06.6.5 5:30:28 PM