English
Activating the Surround/DSP modes
Available Surround/DSP modes vary depending on the
speaker settings and the incoming signals. For details about
the Surround modes, see page 42.
Activating one of the Surround/DSP modes
automatically recalls the memorized settings and
adjustments.
•
To adjust the speaker output level,
see page 36.
•
When activating one of the Surround/DSP modes,
you
can adjust the center tone (see page 38).
•
When activating one of the Surround/DSP modes
(except PLIIx MUSIC, PLII MUSIC, NEO:6 MUSIC, and
ALL CH STEREO),
you can align the vertical localiztion of
the center channel (see page 38).
•
When activating “NEO:6 MUSIC,”
you can adjust the
sound localization of the center channel (see page 38).
•
When activating the DSP mode (except ALL CH
STEREO),
you can adjust the following settings:
– Effect level (see page 37)
– Liveness effect (see page 37)
– Virtual room size (see page 37)
•
When activating “PLIIx MUSIC” and “PLII MUSIC,”
you
can adjust the following settings:
– Center channel localization (see page 38)
– Sound localization position (see page 38)
– Panorama control (see page 37)
7
AUTO SURROUND
You can enjoy the Surround mode easily while playing a
digital source.
• For the Surround/DSP mode seleciton, see page 44.
How does “AUTO SURROUND” work?
• If a multi-channel signal comes in, an appropriate
Surround mode will be selected automatically.
• If a Dolby Digital 2-channel signal with surround signal
comes in, “PLIIx MOVIE” or “PLII MOVIE” will be selected.
• If a Dolby Digital 2-channel signal without surround signal
comes in, “SURROUND OFF (stereo)” will be selected.
• If a Linear PCM signal comes in, “SURROUND OFF (stereo)”
will be selected.
• When “AUTO SURROUND” is activated, the AUTO SURR
indicator lights up on the display.
NOTE
“AUTO SURROUND” does not take effect in the following cases:
– While playing an analog source,
– While selecting one of the fixed digital decode mode—“DOLBY
DIGITAL” or “DTS” (see page 22).
7
About the DSP modes
• The following DSP modes are available regardless of
incoming signal type:
HALL1, HALL2, LIVE CLUB, DANCE CLUB, PAVILION,
THEATER1, THEATER2
• If multi-channel (more than 2 channels) digital signals are
coming in, “MONO FILM” is not available.
• If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is not
available.
Virtual Surround Back
If you have connected (and activated) the surround
speakers, you can use Virtual Surround Back.
This function creates the great surround effect from the
behind without using a surround back speaker as if you
have connected it.
• The VIRTUAL SB indicator lights up on the display.
Virtual Surround Back is activated when selecting any
setting other than “OFF” for the EX/ES/PLIIx setting and
playing back the software including the following signals:
– Dolby Digital Surround EX
– DTS-ES
– Dolby Digital or DTS with 4 channels or more
43
39-44_Surround.indd 43
39-44_Surround.indd 43
06.5.22 4:46:31 PM
06.5.22 4:46:31 PM
Summary of Contents for RX-D411S - AV Receiver
Page 58: ......
Page 59: ......
Page 117: ...0606RYMMDWJEIN EN FR 2006 Victor Company of Japan Limited ...
