42
ENGLISH
Installation and Connection
Installation and Connection
Parts list for installation
Note:
This parts list does not include all the package
contents.
¥
Wiring harness (× 1)
ø
Extension parking cable, 2 m (× 1)
π
Flat head screws, M5 × 8 mm (× 6)
[
Round head screws, M5 x 8 mm (× 6)
“
Steering wheel remote input cable (× 1)
Only for
KW-V640BTM Region 2/KW-M540BT
Australian/New Zealand models/KW-M540BTM
]
Microphone, 3 m (× 1)
Installation procedure
1
Remove the key from the ignition and
disconnect the
·
battery.
2
Make the proper input and output wire
connections for each unit.
3
Connect the speaker wires of the wiring
harness.
4
Connect the wires of the wiring harness
in the following order: ground, battery,
ignition.
5
Connect the wiring harness to the unit.
6
Install the unit in your car.
Make sure that the unit is installed securely in place.
If the unit is unstable, it may malfunction (e.g., the
sound may skip).
7
Reconnect the
·
battery.
8
Configure <Initial Settings>. (Page 4)
Installing the unit
Installing the unit using the mounting
bracket removed from the car
Car bracket
π
/
[
π
/
[
Note:
Select the appropriate screws (supplied) for the
mounting bracket.
Installing in Toyota cars
Install onto the car bracket using the supplied screws
(
[
). Use the mounting holes (
A
or
B
) that fit the car
bracket.
Side view
EN̲KW-V2018TC̲M.indb 42
EN̲KW-V2018TC̲M.indb 42
2018/01/16 15:06
2018/01/16 15:06