manualshive.com logo in svg

JVC KD SH1000 - Radio / CD, Instructions Manual

The JVC KD SH1000 is a versatile Radio/CD unit that combines state-of-the-art sound with reliable performance. Enhance your car audio experience with its crystal-clear reception and powerful sound output. Need help setting it up? Download the Instructions Manual for free from manualshive.com to make the most out of this impressive device.

Share
Download
background image

1

KD-SH1000

Installation/Connection Manual
Manual de instalación/conexión
Manuel d’installation/raccordement

GET0364-002A

[J]

J

Handles

Manijas

Poignées

F

Washer (ø5)

Arandela (ø5)

Rondelle (ø5)

G

Lock nut (M5)

Tuerca de seguridad (M5)

Ecrou d’arrêt (M5)

H

Mounting bolt—M5 

×

 20 mm (M5 

×

 13/16")

Perno de montaje—M5 

×

 20 mm (M5 

×

 13/16 pulgada)

Boulon de montage—M5 

×

 20 mm (M5 

×

 13/16 pouces)

I

Rubber cushion

Cojín de goma

Amortisseur en 
caoutchouc

A

 / 

B

Hard case/Control panel

Estuche duro/Panel de control

Etui de transport/Panneau de commande

C

Sleeve

Cubierta

Manchon

D

Trim plate

Placa de guarnición

Plaque d’assemblage

E

Power cord

Cordón de alimentación

Cordon d’alimentation

  ENGLISH

This unit is designed to operate on 

12 V DC, NEGATIVE ground 

electrical systems

. If your vehicle does not have this system, a 

voltage inverter is required, which can be purchased at JVC car audio 
dealers.

Parts list for installation and connection

The following parts are provided for this unit. If any item is missing, 
consult your JVC car audio dealer immediately.

  ESPAÑOL

Esta unidad está diseñada para funcionar con 

12 V de CC, con 

sistemas eléctricos de masa NEGATIVA

. Si su vehículo no posee 

este sistema, será necesario un inversor de tensión, que puede ser 
adquirido en los concesionarios de JVC de equipos de audio para 
automóviles.

Lista de piezas para instalación y conexión

Con esta unidad se suministran las siguientes piezas. Si hay algún 
elemento faltante, consulte inmediatamente con su concesionario de 
JVC de equipos de audio para automóviles.

K

Remote controller

Control remoto

Télécommade

L

Battery

Pila

Pile

  FRANÇAIS

Cet appareil est conçu pour fonctionner sur des sources de 

courant 

continu de 12 V à masse NEGATIVE

. Si votre véhicule n’offre pas ce 

type d’alimentation, il vous faut un convertisseur de tension, que vous 
pouvez acheter chez un revendeur d’autoradios JVC.

Liste des pièces pour l’installation et 
raccordement

Les pièces suivantes sont fournies avec cet appareil. Si quelque chose 
manquait, consultez votre revendeur autoradio JVC immédiatement.

0206DTSMDTJEIN
EN, SP, FR

PRECAUTIONS on power supply and speaker 
connections:

•

  DO NOT connect the speaker leads of the power cord to the 

car battery; otherwise, the unit will be seriously damaged.

•

  BEFORE connecting the speaker leads of the power cord to the 

speakers, check the speaker wiring in your car.

PRECAUCIONES sobre las conexiones de la 
fuente de alimentación y de los altavoces:

•

  NO conecte los conductores de altavoz del cable de 

alimentación a la batería de automóvil, pues podrían 
producirse graves daños en la unidad.

•

  ANTES de conectar a los altavoces los conductores de altavoz del 

cable de alimentación, verifique el conexionado de altavoz de su 
automóvil.

PRECAUTIONS sur l’alimentation et la 
connexion des enceintes:

•

  NE CONNECTEZ PAS les fils d’enceintes du cordon 

d’alimentation à la batterie; sinon, l’appareil serait 
sérieusement endommagé.

•

  AVANT de connecter les fils d’enceintes du cordon d’alimentation 

aux enceintes, vérifiez le câblage des enceintes de votre voiture.

© 2006 Victor Company of Japan, Limited

Heat sink

Sumidero térmico

Dissipateur de chaleur

WARNINGS

To prevent short circuits, we recommend that you disconnect the 
battery’s negative terminal and make all electrical connections before 
installing the unit.

•

  Be sure to ground this unit to the car’s chassis again after 

installation.

Notes:

•

  Replace the fuse with one of the specified rating. If the fuse blows 

frequently, consult your JVC car audio dealer.

•

  It is recommended to connect to the speakers with maximum 

power of more than 50 W (both at the rear and at the front, with an 
impedance of 

4 

Ω

 to 8 

Ω

). If the maximum power is less than 50 W, 

change “Amp Gain” setting to prevent the speakers from being 
damaged (see page 22 of the INSTRUCTIONS).

•

  To prevent short-circuit, cover the terminals of the UNUSED leads 

with insulating tape.

•

  The heat sink becomes very hot after use. Be careful not to touch it 

when removing this unit.

ADVERTENCIAS

Para evitar cortocircuitos, recomendamos que desconecte el terminal 
negativo de la batería y que efectúe todas las conexiones eléctricas 
antes de instalar la unidad.

•

  Asegúrese de volver a conectar a masa esta unidad al chasis 

del automóvil después de la instalación.

Notas:

•

  Reemplace el fusible por uno con la corriente especificada. Si el 

fusible se quemase frecuentemente consulte con su concesionario 
de JVC de equipos de audio para automóviles.

•

  Se recomienda conectar los altavoces con una potencia máxima 

de más de 50 W (tanto atrás como adelante, con una impedancia 
de 

4 

Ω

 a 8 

Ω

). Si la potencia máxima es de menos de 50 W, cambie 

“Amp Gain” para evitar daños en los altavoces (consulte la página 22 
del MANUAL DE INSTRUCCIONES).

•

  Para evitar cortocircuitos, cubra los cables NO UTILIZADOS con cinta 

aislante.

•

  El sumidero térmico estará muy caliente después del uso. Asegúrese 

de no tocarlo al desmontar esta unidad.

AVERTISSEMENTS

Pour éviter tout court-circuit, nous vous recommandons de débrancher 
la borne négative de la batterie et d’effectuer tous les raccordements 
électriques avant d’installer l’appareil.

•

  Assurez-vous de raccorder de nouveau la mise à la masse de 

cet appareil au châssis de la voiture après l’installation.

Remarques:

•

  Remplacer le fusible par un de la valeur précisée. Si le fusible saute 

souvent, consulter votre revendeur d’autoradios JVC.

•

  Il est recommandé de connecter des enceintes avec une puissance de 

plus de 50 W (les enceintes arrière et les enceintes avant, avec une 
impédance comprise entre 

4 

Ω

 et 8 

Ω

). Si la puissance maximum est 

inférieure à 50 W, changez “Amp Gain” pour éviter d’endommager 
vos enceintes (voir page 22 du MANUAL D’INSTRUCTIONS).

•

  Pour éviter les court-circuits, couvrir les bornes des fils qui ne sont 

PAS UTILISÉS avec de la bande isolante.

•

  Le dissipateur de chaleur devient très chaud après usage. Faire 

attention de ne pas le toucher en retirant cet appareil.

Instal1-3_KD-SH1000_002_f.indd   1

Instal1-3_KD-SH1000_002_f.indd   1

2/13/06   12:17:12 PM

2/13/06   12:17:12 PM

Summary of Contents for KD SH1000 - Radio / CD



























































































































































































































































































Reviews:

No comments

Related manuals for KD SH1000 - Radio / CD

Eclipse AVN2454 Installation Manual preview
AVN2454
Brand: Eclipse Pages: 16
Eclipse AVN4400 Owner'S Manual preview
AVN4400
Brand: Eclipse Pages: 132
Eclipse AVN2210p mk II Installation Manual preview
AVN2210p mk II
Brand: Eclipse Pages: 8
Eclipse AVN 5495 Installation Manual preview
AVN 5495
Brand: Eclipse Pages: 20
Eclipse 55090 Owner'S Manual preview
55090
Brand: Eclipse Pages: 60
Yamaha RX-Z11 - AV Receiver Service Manual preview
RX-Z11 - AV Receiver
Brand: Yamaha Pages: 243
Axxera AC404iM Installation & Owner'S Manual preview
AC404iM
Brand: Axxera Pages: 28
XPR Access B100PAD-M Installer Manual preview
B100PAD-M
Brand: XPR Access Pages: 20
Denon AVR-2808CI Service Manual preview
AVR-2808CI
Brand: Denon Pages: 167
AUDIOLINE UDR300 User Manual preview
UDR300
Brand: AUDIOLINE Pages: 2
Marantz SR5005 (French) Manuel D'Utilisation preview
SR5005
Brand: Marantz Pages: 91
Pyle PLCD58MP3 Owner'S Manual preview
PLCD58MP3
Brand: Pyle Pages: 4
Audiovox VME9020TS Manual & Warranty preview
VME9020TS
Brand: Audiovox Pages: 78
Strong SRT 7000 User Manual preview
SRT 7000
Brand: Strong Pages: 25
Leuze electronic LSIS 222 Technical Description preview
LSIS 222
Brand: Leuze electronic Pages: 95
MOTIVE-RC R8SB Instruction Manual preview
R8SB
Brand: MOTIVE-RC Pages: 3
FTE Maximal MAX S122 Manual preview
MAX S122
Brand: FTE Maximal Pages: 38
VDO CD 2604 MP3 - Datasheet preview
CD 2604 MP3 -
Brand: VDO Pages: 2

Brands by name

Popular brands

Load more brands