JVC KD SH1000 - Radio / CD Instructions Manual Download Page 38

Page: 38 / 282

ENGLISH

Symptoms

Remedies/Causes

General

• Sound cannot be heard from the speakers.

• Adjust the volume to the optimum level.
• Check the cords and connections.

• The unit does not work at all.

Reset the unit (see page 2).

• “Connect Error” appears on the display.

Remove the control panel, wipe the connector, then attach
it again (see pages 4 and 31).

• “Push Reset” appears on the display and the

control panel movement is freezed.

Reset the unit (see page 2). If this does not work, check the
installation.

FM/AM

• SSM automatic presetting does not work.

Store stations manually.

• Static noise while listening to the radio.

Connect the antenna firmly.

Disc playback

• Disc cannot be played back.

Insert the disc correctly.

• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be skipped.

• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which you

used for recording.

• Disc can be neither played back nor ejected.

• Unlock the disc (see page 14).
• Eject the disc forcibly (see page 2).

• Disc cannot be recognized (“No Disc,” “Loading

Error,” or “Eject Error” appears).

Eject the disc forcibly (see page 2).

• Disc sound is sometimes interrupted.

•  Stop playback while driving on rough roads.
•  Change the disc.
•  Check the cords and connections.

MP3/WMA playback

• Disc cannot be played back.

• Use a disc with MP3/WMA tracks recorded in the format

compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.

• Add the extension code <.mp3> or <.wma> to the file

names.

• Noise is generated.

Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service
center.

EN36-43_SH1000J_001A_2.indd 38

1/17/06 10:47:04 AM

Summary of Contents for KD SH1000 - Radio / CD



























































































































































































































































































Search results

Summary of Contents for KD SH1000 - Radio / CD

Reviews:

Related manuals for KD SH1000 - Radio / CD

Brands by name

Popular brands

JVC KD SH1000 - Radio / CD, Instructions Manual

Search results

Summary of Contents for KD SH1000 - Radio / CD

Reviews:

Related manuals for KD SH1000 - Radio / CD

Brands by name

Popular brands