manualshive.com logo in svg

JVC KD SH1000 - Radio / CD, Instructions Manual

The JVC KD SH1000 is a versatile Radio/CD unit that combines state-of-the-art sound with reliable performance. Enhance your car audio experience with its crystal-clear reception and powerful sound output. Need help setting it up? Download the Instructions Manual for free from manualshive.com to make the most out of this impressive device.

Share
Download
background image

Vous pouvez recréer un monde de “son pur” dans votre voiture en connectant un système d’enceintes à trois 
voies (hautes fréquences/moyennes fréquences/extrêmes graves).

IMPORTANT:

Si vous avez installé un système d’enceintes à trois voies dans votre voiture, assurez-vous 
de ce qui suit.

•  Connectez le système d’enceintes comme montré ci-dessous.
•  Avant d’utiliser le système, mettez en service le réseau de transition et préréglez les fréquences de

coupure appropriées pour HPF/LPF (plus spécialement pour HPF); sinon, les enceintes risqueraient 
d’être endommagées.

•  Pour en savoir plus sur les réglages, référez-vous aux pages 21 et 22 du MANUEL D’INSTRUCTIONS.

You can enjoy a world of “pure audio” in your car by connecting 3-way network speaker system 
(high-range/mid-range/subwoofer).

IMPORTANT:

If you have installed the 3-way network speaker system in the car, make sure of the 
following.

•  Connect the speaker system as illustrated below.
•  Before using the system, activate crossover network and preset the appropriate cutoff frequencies for 

HPF/LPF (especially for HPF); otherwise, it may damage the speakers.

•  For details about the setting, see pages 21 and 22 of the INSTRUCTIONS.

5

E

Speaker connections for 3-way network speaker system / Connexion des enceintes pour un système d’enceintes à 3 voies

Right high-range speaker

Haut-parleur hautes fréquences droit

Remote lead (Blue with white stripe)

Fil d’alimentation à distance (Bleu avec bande blanche)

Y-connector (not supplied for this unit) 

Connecteur Y (non fourni avec cet appareil)

Left high-range speaker

Haut-parleur hautes fréquences gauche

Connecting subwoofer / Connexion du haut-parleur d’extrêmes graves

Remote lead

Fil d’alimentation à distance

White with black stripe

Blanc avec bande noire

White

Blanc

Gray with black stripe

Gris avec bande noire

Gray

Gris

Green with black stripe

Vert avec bande noire 

Green

Vert

Purple with black stripe

Violet avec bande noire

Purple

Violet

Left mid-range speaker

Haut-parleur moyennes fréquences gauche

Right mid-range speaker

Haut-parleur moyennes fréquences 
droit

When connecting the speakers (high-range/mid-range) through the speaker output

Lors de la connexion des enceintes (hautes fréquences/moyennes fréquences) aux sorties d’enceinte

When connecting the speakers (high-range/mid-range) through the external amplifiers—to 
obtain more powerful sound

Lors de la connexion des enceintes (hautes fréquences/moyennes fréquences) à travers des 
amplificateurs extérieurs—pour obtenir un son plus puissant

JVC Amplifier

JVC Amplificateur

JVC Amplifier

JVC Amplificateur

JVC Amplifier

JVC Amplificateur

Subwoofer

Caisson de grave

Right high-range speaker

Haut-parleur hautes fréquences droit

Left high-range speaker

Haut-parleur hautes fréquences 

gauche

Left mid-range speaker

Haut-parleur moyennes fréquences 

gauche

Right mid-range speaker

Haut-parleur moyennes fréquences droit

To subwoofer out

À la sortie du caisson 
de grave 

To LINE OUT (REAR)

À LINE OUT (REAR)

To LINE OUT (FRONT)

À LINE OUT (FRONT)

*

4

  Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the 

wire). Failure to do so may cause damage to the unit.

*

4

  Attachez solidement le fil de mise à la masse au châssis métallique de la voiture—à un endroit qui n’est pas recouvert de peinture (s’il est recouvert de peinture, enlevez d’abord 

la peinture avant d’attacher le fil). L’appareil peut être endommagé si cela n’est pas fait correctement.

*

5

  Signal cord (not supplied for this unit)

*

5

  Cordon de signal (non fourni avec cet autoradio)

Instal4-6_SH1000E_010A_f.indd   5

Instal4-6_SH1000E_010A_f.indd   5

1/21/06   12:39:21 PM

1/21/06   12:39:21 PM

Summary of Contents for KD SH1000 - Radio / CD



























































































































































































































































































Reviews:

No comments

Related manuals for KD SH1000 - Radio / CD

Parkside PAA 20-Li B2 Original Instructions Manual preview
PAA 20-Li B2
Brand: Parkside Pages: 65
Pyle PLTS73FX Owner'S Manual preview
PLTS73FX
Brand: Pyle Pages: 39
Axxera AV714BH Installation & Owner'S Manual preview
AV714BH
Brand: Axxera Pages: 32
PCB Piezotronics JM353B18 Installation And Operating Manual preview
JM353B18
Brand: PCB Piezotronics Pages: 17
ICT tSec Extra Application Note preview
tSec Extra
Brand: ICT Pages: 7
X2 Digital Wireless Systems XDS95 User Manual preview
XDS95
Brand: X2 Digital Wireless Systems Pages: 12
Fortec Star Mercury II Digital FTA Quick Start preview
Mercury II Digital FTA
Brand: Fortec Star Pages: 3
ID Tech PiP User Manual preview
PiP
Brand: ID Tech Pages: 12
PowerBox Systems PBR-5S Instruction Manual preview
PBR-5S
Brand: PowerBox Systems Pages: 3
FrSky Archer R10 Pro Instruction Manual preview
Archer R10 Pro
Brand: FrSky Pages: 2
Harman Kardon SR900 Installation And Operation Manual preview
SR900
Brand: Harman Kardon Pages: 12
WiPath PDR3000 User Manual preview
PDR3000
Brand: WiPath Pages: 6
USA Technologies ePort G9 Card Reader Install Manual preview
ePort G9 Card Reader
Brand: USA Technologies Pages: 9
Onkyo TX-NR3010 Service Manual preview
TX-NR3010
Brand: Onkyo Pages: 159
Trevi HE 3375TS User Manual preview
HE 3375TS
Brand: Trevi Pages: 44
TGM PSION WORKABOUT PRO Instruction Manual preview
PSION WORKABOUT PRO
Brand: TGM Pages: 40
CYP CH-107 RX Operation Manual preview
CH-107 RX
Brand: CYP Pages: 12
Asus CarLink User Manual preview
CarLink
Brand: Asus Pages: 54

Brands by name

Popular brands

Load more brands