JVC KD SH1000 - Radio / CD Instructions Manual Download Page 80

Page: 80 / 282

ENGLISH

Sound adjustments

Selecting the DSP modes—DSP

• Effectiveness of “V.Cancel” depends on the

recording condition of the sources:

– Monaural sources such as AM and

monaural FM broadcasting programs.

– Multiplex sound sources.
– Sources recorded with duets, strong echo, a

chorus, or only a few instruments.

• When “4ch” is selected, rear speakers are

used only to reproduce reflections and
reverberations in order to creates a being-
there feeling in your car compartment.

• If fader or balance has been set close to

its extreme, appropriate effect may not be
obtained.

• You cannot adjust the effect level and speaker

number when “Defeat” is selected with
crossover network activated.

Storing your own sound modes

• If you do not want to store your current

adjustment, but only to apply the adjustment
to the current playback source, press MENU
to go back to the operation screen of the
current source. Adjustment you made
remains effective until you select a sound
mode.

Setting the sound modes—SEL

• If you are using a two-speaker system, set the

fader level to the center.

• Subwoofer out setting takes effect only when a

subwoofer is connected.

• You cannot change the input level—

“VolAdjust” of the FM stations. If the source
is FM, “Fix” will appear when you try to
adjust it.

General settings — PSM

• “Auto Dimmer” may not work correctly on

some vehicles, particularly on those having a
control dial for dimming. In this case, change
the “Dimmer” setting to any one other than
“Auto.”

• If you change the “Amp Gain” setting from

“High PWR” to “Low PWR” while the volume
level is set higher than “Volume 30,” the unit
automatically changes the volume level to
“Volume 30.”

Title assignment

• If you try to assign titles to more than 30

station frequencies or 30 discs, “Name
Full” appears. Delete unwanted titles before
assignment.

• Titles assigned to discs in the CD changer can

also be shown if you play back the disc in the
unit and vise versa.

iPod® or D. player operations

• When you turn on this unit, the iPod or

D. player is charged through this unit.

• While the iPod or D. player is connected, all

operations from the iPod or D. player are
disabled. Perform all operations from this
unit.

• The text information may not be displayed

correctly.
– Some characters such as accented letters

cannot be shown correctly on the display.

– Depends on the condition of

communication between the iPod or
D. player and the unit.

• If the text information includes more than

16 characters, it scrolls on the display (see
also page 20). This unit can display up to 40
characters.

Notice:

When operating an iPod or a D. player,
some operations may not be performed
correctly or as intended. In this case, visit the
following JVC web site:

For iPod users:

<http://www.jvc.co.jp/

english/car/support/ks-pd100/index.html>

For D. player users:

<http://www.jvc.co.jp/

english/car/support/ks-pd500/index.html>

EN30-37_SH1000U_001A_2.indd 30

1/6/06 7:46:35 PM

Summary of Contents for KD SH1000 - Radio / CD



























































































































































































































































































Search results

Summary of Contents for KD SH1000 - Radio / CD

Reviews:

Related manuals for KD SH1000 - Radio / CD

Brands by name

Popular brands

JVC KD SH1000 - Radio / CD, Instructions Manual

Search results

Summary of Contents for KD SH1000 - Radio / CD

Reviews:

Related manuals for KD SH1000 - Radio / CD

Brands by name

Popular brands