JVC KD SH1000 - Radio / CD Instructions Manual Download Page 39

Page: 39 / 282

ENGLISH

Continued on the next page

Symptoms

Remedies/Causes

MP3/WMA playback

• A longer readout time is required (“File

Check” keeps flashing on the display).

Do not use too many hierarchies and folders.

• Tracks do not play back in the order you have

intended them to play.

Playback order is determined when the files are recorded.

• Elapsed playing time is not correct.

This sometimes occurs while playing. This is caused by how
the tracks are recorded on the disc.

• “No Files” appears on the display.

Insert a disc that contains MP3/WMA tracks.

• “Not Support” appears on the display and

track skips.

Skip to the next track encoded in an appropriate format or
to the next non-copy-protected WMA track.

• “No Music” appears on the display.

Change the disc that contains MP3/WMA tracks.

• Correct characters are not displayed (e.g.

album name).

This unit can only display letters (capital: A – Z, small:
a – z), numbers, and a limited number of symbols and
special characters (see page 37).

SD card/USB memory playback

• Noise is generated.

The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)

• “File Check” keeps flashing on the display.

•  Readout time varies depending on the device.
•  Do not use too many hierarchy and folders.
•  Turn off the power then on again.

• “No Files” appears on the display.

Play a device that contains tracks encoded in an
appropriate format.

• “Not Support” appears on the display and

track skips.

The track is unplayable.

• “Read Failed” appears on the display, then

returns to the previous source.

• The device may be malfunctioning, or may not have

been formatted correctly.

The files included in the device are corrupted.
• Do not pull out or attach the USB memory repeatedly

while “File Check” appears on the display.

• “SD Loading Error” appears on the display

while playing tracks from an SD card.

Detach the control panel and reinsert the SD card. The
control panel goes back to initial position (Angle 1).

• While playing a track, sound is sometimes

interrupted.

MP3/WMA tracks have not been properly copied into the
device.
Copy MP3/WMA tracks again into the device, and try
again.

• Correct characters are not displayed (e.g.

album name).

This unit can only display letters (capital: A – Z, small:
a – z), numbers, and a limited number of symbols and
special characters (see page 37).

EN36-43_SH1000J_001A_2.indd 39

1/17/06 10:47:04 AM

Summary of Contents for KD SH1000 - Radio / CD



























































































































































































































































































Search results

Summary of Contents for KD SH1000 - Radio / CD

Reviews:

Related manuals for KD SH1000 - Radio / CD

Brands by name

Popular brands

JVC KD SH1000 - Radio / CD, Instructions Manual

Search results

Summary of Contents for KD SH1000 - Radio / CD

Reviews:

Related manuals for KD SH1000 - Radio / CD

Brands by name

Popular brands