JVC KD-R900, Instructions Manual

Page: 171 / 210

ENGLISH
9 OPERATIONS
Listening to the radio
1 Select “ FM, ” “ AM ” or “ FM-LOW ”
2 Search for a station to listen—Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same button
again.
• You can also search for a station manually—Manual Search. Hold either one of the
buttons until “M” appears on the display, then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, the
indicator lights up on the display.
Note:
FM: 87.50 MHz – 108.00 MHz
FM-LOW: 65.00 MHz – 74.00 MHz
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
• Not applicable when the source is “FM-LOW.”
• See also page 27.
< Tuner > < Stereo/Mono >
< Mono >
Reception improves, but stereo effect will be lost. The
lights up on the display.
To restore the stereo effect, repeat the same
procedure to select < Stereo >.
[Turn]
=
[Press]
Storing stations in memory
Automatic presetting (FM/FM-LOW)—
SSM (Strong-station Sequential Memory)
You can preset up to 12 stations for FM, and 6 stations
for FM-LOW.
1
While listening to a station, enter “SSM”
screen.
2
Select the preset number range you want to
store.
FM:
SSM 01–06, SSM 07–12
FM-LOW:
SSM 01–06
3
Local FM stations with the strongest signals are
searched and stored automatically.
• To stop searching, press
4
/
¢
.
To preset other 6 stations, repeat from step 1 again.
Continued on the next page
EN02-09_KD-R907[EE]_f.indd 9 EN02-09_KD-R907[EE]_f.indd 9 17/3/09 2:46:11 PM 17/3/09 2:46:11 PM