JVC KD-R900 Instructions Manual Download Page 38

Page: 38 / 210

ENGLISH

More about this unit

Disc/USB operations

Caution for DualDisc playback

• The Non-DVD side of a “DualDisc” does not comply

with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.

General

• This unit has been designed to reproduce

CDs/CD Texts, and CD-Rs (Recordable)/CD-RWs
(Rewritable) in audio CD (CD-DA), MP3 and WMA
formats.

• When a disc is inserted upside down, “Please Eject”

appears on the display. Press OPEN, then press

eject the disc.

• In this manual, words “track” and “file” are

interchangeably used.

• While fast-forwarding or reversing on an MP3/WMA/

WAV file, you can only hear intermittent sound.

• File/folder list may not appear correctly if too many

hierarchies and folders are used.

Playing a CD-R or CD-RW

• Use only “finalized” CD-Rs or CD-RWs.
• This unit can only play back files of the same type as

those which are detected first if a disc includes both
audio CD (CD-DA) files and MP3/WMA files.

• This unit can play back multi-session discs; however,

unclosed sessions will be skipped while playing.

• Some CD-Rs or CD-RWs may not play back on this

unit because of their disc characteristics, or for the
following reasons:

– Discs are dirty or scratched.
– Moisture condensation has occurred on the lens

inside the unit.

– The pickup lens inside the unit is dirty.
– The files on the CD-R/CD-RW are written using the

“Packet Write” method.

Basic operations

Turning on the power

• By pressing SRC on the unit, you can also turn on the

power. If the source is ready, playback also starts.

Turning off the power

• If you turn off the power while listening to a track,

playback will start from where it had been stopped
previously next time you turn on the power.

General

• If you change the source while listening to a disc,

playback stops.

Next time you select “

” as the playback source,

playback will start from where it had been stopped
previously.

• If the ejected disc is not removed within 15 seconds,

the disc is automatically inserted again into the
loading slot to protect it from dust.

• After ejecting a disc or removing a USB device,

“No Disc” or “No USB” appears and you cannot
operate some of the buttons. Insert another disc,
reattach a USB device, or press SRC to select another
playback source.

• If no operation is done for about 30 seconds after

pressing MENU button or control dial, the operation
will be canceled.

Tuner operations

Storing stations in memory

• During SSM search...
– All previously stored stations are erased and the

stations are stored anew.

– When SSM is over, the station stored in the lowest

preset number will be automatically tuned in.

• When storing a station manually, the previously

preset station is erased when a new station is stored
in the same preset number.

EN38-45_KD-R900[J]f.indd 38

2/3/09 4:39:55 PM

Summary of Contents for KD-R900



















































































































































































































Search results

Summary of Contents for KD-R900

Reviews:

Related manuals for KD-R900

Brands by name

Popular brands

JVC KD-R900, Instructions Manual

Search results

Summary of Contents for KD-R900

Reviews:

Related manuals for KD-R900

Brands by name

Popular brands