JVC GY-HM170E, Instructions Manual

Page: 72 / 212

Time Code and User’s Bit
Time code and user’s bit data are recorded with the
video in this camera recorder.
The time code and user’s bit are displayed on the
viewfinder and LCD monitor during playback or
recording. (Display screen)
Displaying Time Code and User’s Bit
The time code and user’s bit are displayed on the
viewfinder and LCD monitor during playback or
recording.
The display differs according to the menu settings.
1 Set [LCD/VF]
B
[Display Settings]
B
[TC/UB]
to settings other than “Off”.
(
A
P115 [ TC/UB ] )
When “TC” or “UB” is selected, time code or
user’s bit data is displayed respectively on the
display screen.
.
1/ 100
F1. 6
18
dB
AE
+
6
ND 1 /16
12 :34 : 56
Jan 24 , 2015
00: 00: 00.00
4030 20 10 0
5 . 6f t
P 15000K
0 0 : 0 0 : 0 0 . 0 0
F F E E D D 2 0
Time Code Operation Mode
Set the time code operation in [TC/UB]
B
[TC
Generator].
(
A
P111 [ TC Generator ] )
Setting Description
Free Run The time code operates in the run
mode at all times regardless of the
recording status.
It continues to run even when the
power of the camera recorder is
turned off.
Rec Run The time code operates in the run
mode during recording. It
continues to run in the order of the
recorded clips as long as the SD
card is not replaced. If the SD card
is removed and recording is made
on another card, time code will be
recorded on the new card from
where it was left off in the previous
card.
Regen The time code operates in the run
mode during recording. When the
SD card is replaced, the last time
code recorded on the card is read
and recorded on a new card so that
the time code continues in running
order.
(
A
P73 [Setting Time Code] )
Free
Run(NTP)
n
Time code information can be
synchronized with the time
information obtained from the NTP
server.
Memo :
0
When [System]
B
[Record Set]
B
[Rec Mode] is
set to “Interval Rec” or “Frame Rec”, and [TC
Generator] is set to “Free Run”, Rec Run is
activated.
0
When [System]
B
[Record Set]
B
[Record
Format]
B
[
W
Format]/[
Y
Format] is set to
“AVCHD”, and [System]
B
[Record Set]
B
[Rec
Mode] is set to “Pre Rec”, Free Run is activated.
(
A
P123 [
W
Format ] )
(
A
P124 [
Y
Format ] )
0
When [System]
B
[Network]
B
[NTP Set]
B
[TC]
is set to “On”, Free Run (NTP) is activated.
n
72
Time Code and User’s Bit
Shooting