JVC GY-HM170E, Instructions Manual

Page: 103 / 212

Shutter
For specifying shutter-related settings.
Set to “Step” (fixed value) or “Variable” when
operating with the
J
/
K
volume buttons on the side
of the camera recorder.
0
Variable:
Sets to variable scan. Use this setting when
shooting a PC monitor.
0
Step:
Sets to step shutter, which switches the shutter
speed by a fixed value.
[Setting Values: Variable,
R
Step]
AE Speed
For setting the convergence speed during AE (Auto
Exposure).
[Setting Values:
R
Fast, Middle, Slow]
AGC Limit
For setting the maximum gain value of “AGC”,
which electrically boosts the sensitivity level
according to the brightness automatically.
[Setting Values: 24 dB, 18 dB,
R
15dB, 12 dB, 6 dB]
Memo :
0
During full auto, the setting values become “---”
and cannot be changed.
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when
auto iris is enabled.
[Setting Values: F4, F2.8,
R
F2, F1.8, F1.6, F1.4,
F1.2]
Memo :
0
During full auto, the setting values become “---”
and cannot be changed.
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when
auto iris is enabled.
[Setting Values: F11,
R
F8, F5.6, F4]
Memo :
0
During full auto, the setting values become “---”
and cannot be changed.
Manual Iris Limit
For setting whether to activate the open/close limit
when manual iris is enabled.
[Setting Values:
R
On, Off]
Memo :
0
During auto iris mode, the setting values
become “---” and cannot be changed.
Manual Iris Limit(OPEN)
For setting the limit value of the OPEN end when
manual iris is enabled.
[Setting Values: F4, F2.8,
R
F2, F1.8, F1.4, F1.2]
Manual Iris Limit(CLOSE)
For setting the limit value of the CLOSE end when
manual iris is enabled.
[Setting Values:
R
CLOSE, F11, F8, F5.6, F4]
EEI Limit
For setting the shutter speed control range when
the Automatic Shutter mode (EEI) is enabled.
[Setting Values: 4F-stop,
R
3F-stop, 2F-stop]
Memo :
0
During full auto, the setting values become “---”
and cannot be changed.
Smooth Trans
For setting the shock reduction function, which
slows down the sudden change when switching
with the [GAIN] or [WHT.BAL B/A/PRST] switch.
[Setting Values: Fast, Middle, Slow,
R
Off]
Memo :
0
This function is disabled when AGC is operating.
FAW
For setting the position in the white balance switch
[WHT.BAL B/A/PRST] to assign the FAW (Full
Auto White Balance) function.
[Setting Values: B, A, PRST,
R
None]
Camera Function Menu
103
Menu Display and Detailed Settings