Caution:
Be careful not to pinch your fingers in the gap between the monitor and the stand.
When lifting up the stand, lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel being damaged.
Be careful not to pinch your fingers in the moving parts.
The Max tilt angle is down 7° and up 9°, please make sure the setup location is stable, to prevent the monitor falling down.
Place the monitor on a mat to avoid scratching the table surface.
Step1: Install the Back Plate onto the Bottom Plate by supplied 5 scews.
Step2: Install the Back plate onto the monitor by 4 screws.
The Max tilt angle is down 3° and up 8°, please make sure the setup location is stable.
6
Installation
Do not rest your arm on the monitor or lean against the monitor.
Do not touch the LCD panel when installing the monitor.
Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury.
The monitor package provides a desktop stand to be installed.
Step1: Fix the supplied rack ears onto left and right side of the DT-G17E monitor, by supplied 4 screws.
Step2: Install the monitor onto the standard 19-inch rack. Occupy 7U height.
Using the monitor on the stand
The DT-G17E provides a pair of rack ears to be installed on standard 19” racks.
Using the monitor on 19” rack
(Only DT-G17E)
3
°
8
°
Back Plate
Bottom Plate
