14
ENGLISH
Possibilities of combining the source with a Secondary input
= source combinable with Secondary input
- = source not combinable with Secondary input
PIP Quelle
Quelle
Tuner *
SCART
1
SCART
2
CVBS
S-Video
YUV
PC
(RGB)
HDMI1
HDMI2
Tuner *
-
-
-
-
-
-
-
SCART1
-
-
-
-
-
-
-
SCART2
-
-
-
-
-
-
-
CVBS
-
-
-
-
-
-
-
S-Video
-
-
-
-
-
-
-
YUV
-
-
-
-
-
-
-
PC (RGB)
-
-
-
-
-
-
-
HDMI1
-
-
HDMI2
-
-
* The TV tuner is an option.
If no signal is pending at the selected PIP source, the picture-in-picture function is terminated after approx. 30 seconds.
Still picture / Overscan
Still picture
You can view still pictures of the current channel.
S
Press the button [FREEZE] on the remote control.
The current picture is frozen.
S
Press the [FREEZE] button again to terminate the
still picture function again.
If the picture-in-picture function is set, both pictures are
frozen.
S
On the OSD menu you can also switch the still
picture function on and off under the menu option
<Display
⇒
Freeze Picture>.
<Overscan> Only with HDMI !
With the buttons [
Y
] / [
B
] select the menu option
<Overscan>. With the buttons [
A
] / [
"
] you can switch
<Overscan> on or off.
If the option Overscan is switched on, the picture edge
is trimmed by approx. 10 %. Any faults on the edge of
the picture are eliminated or made non-visible by this
cutting facility.
Sleep timer
Upon expiry of the preselected time the sleep timer
switches the device to standby mode.
S
Press the button [ ] on the remote control until the
desired time up to switch-off is reached.
The following times can be selected:
30, 60, 90, 120, 150, 180 minutes and Off.
