12
ENGLISH
Operator control
Switching on / off
The device is switched on.
Please note the mains switch must be in position “I”
(see page 10 below).
The indicator Power On lights up blue on the device.
If a signal is pending at any input, the device is
switched automatically to standby mode after a waiting
period.
The indicator Power On lights up orange on the device.
If a signal is available at any input, the device is
switched on automatically.
S
To switch off the device you must set the mains
switch in position “0”
Channel change
(optional with tuner)
S
Select TV mode by pressing the [TV] button on the
remote control.
With the buttons [P
Y
] / [P
B
] on the remote control:
S
Press the button [P
Y
] to increase the channel num-
ber.
S
Press the button [P
B
] to reduce the channel
number.
With the buttons [0...9] on the remote control:
Select the channel number directly by pressing the
buttons [0...9].
With the channel overview in the OSD menu:
S
Press the button [LIST] on the remote control to dis-
play the channel overview on the display.
S
Select a channel with the buttons [
BY
" A
] on
the remote control.
S
Press the red button to close the channel overview.
Volume and sound settings
(only with integrated loudspeaker)
With the buttons [VOL
"
] / [
A
VOL] on the remote
control:
S
Press the button [VOL
"
] to increase the volume.
S
Press the button [
A
VOL] to reduce the volume.
Indication on operation (Power On) (blue)
Indication when on standby (orange)
IR sensor for
remote control
Channel information
