JVC CO-46LCD-BD, Operating Manual

Page: 19 / 250

17 ENGLISH
Setting the decoder
You can use the SCART1 or SCART2 input to connect
a decoder for coded TV channels (pay TV).
S Select <Decoder> [
Y
] / [
B
].
You have the following selection options:
Decoder
TV channel
Decoder
Sound Picture
Off Uncoded Uncoded
Decoder A SCART1 Uncoded Coded
Decoder B SCART1 Coded Coded
Decoder A SCART2 Uncoded Coded
Decoder B SCART2 Coded Coded
Editing the channel overview
It is described below how you can change the sequence of stored TV channels or delete them from the channel overview.
S Press the [MENU] button to open the main menu.
S With the button [
A
] or [
"
] select the <Setup> menu.
S Select <Tuner> with the button [
Y
] or [
B
] and press
the button [
"
].
S
Select the menu option <Edit station list> [
Y
] / [
B
]
and press the button [
"
].
The menu <Editing the channel overview> appears on
screen.
S With the buttons [
YBA"
] select the channel that
is to be shifted.
S Press the yellow button (mark). The channel is
marked yellow.
S With the blue button (sorting mode) you can
change over between swap and insert.
Sorting mode Swap
S Select a channel with which you would like to
swap the marked channel.
Use the buttons [
YBA"
] to do this.
S Press the yellow button (swap) to execute the
procedure.
Sorting mode Insert
S
Press the blue button (sorting mode) to execute
the sorting mode Insert.
S Select a channel in the position of which you
would like to insert the marked channel. Use the
buttons [
YBA"
] to do this.
S Press the yellow button (Insert) to execute the
procedure.
Deleting a channel
S
With the buttons [
YBA"
] select the channel that
is to be deleted.
S Press the green button (Delete) to delete the se-
lected channel from the channel overview.
S To close the menu, press the red button.
E
N
GLIS
H