Juniper QFX5100, Hardware Manual

Page: 36 / 256

Figure 9: QFX5100-48S Switch Port Panel
3— 1— 40 GbE ports (6) Electrostatic Discharge (ESD) terminal
2—10 G ports (48)
Related
Documentation
Field-Replaceable Units in a QFX5100 Switch on page 8
•
•
Port Panel of a QFX5100-24Q Switch on page 18
•
Port Panel of a QFX5100-96S Switch on page 22
•
Access Port and Uplink Port LEDs on a QFX5100 Switch on page 217
•
Installing and Removing QFX5100 Switch Hardware Components on page 193
•
Connecting QFX Series Switches in a Virtual Chassis
•
Connecting a QFX5100 Switch in a Virtual Chassis Fabric on page 183
Port Panel of a QFX5100-24Q Switch
The port panel of the QFX5100-24Q switch consists of 24 quad small-form factor
pluggable plus (QSFP+) ports. Each QSFP+ socket can be configured to support 40 GbE
or as a set of 4 independent 10 GbE ports using breakout cables (channelization mode).
Any of the 24 ports can be configured as either uplink or access ports. The QFX5100-24Q
switch has two module bays for the optional expansion module, QFX-EM-4Q, which can
add a total of 8 additional QSFP+ ports to the chassis. The QFX-EM-4Q ports can also
be configured as either access ports or as uplinks, but only ports 0 and 2 can be
channelized using port mode.
Figure 10 on page 18 shows the port panel of the
QFX5100-24Q switch.
Figure 10: QFX5100-24Q Switch Port Panel
3— 1— Expansion module bays with cover panels
(2) Electrostatic Discharge (ESD) terminal
2—QSFP+ access interface or uplink ports (24)
This topic describes:
• Switch Ports on page 19
• Channelizing Interfaces on page 19
Copyright © 2014, Juniper Networks, Inc. 18
QFX5100 Switch Hardware Guide