Juniper QFX5100, Hardware Manual

Page: 33 / 256

Figure 8: Management Panel Components on the QFX5100-96S
4— 1— RJ-45 console port (C0N) ) Status LEDs
5— 2— USB port em1–SFP management Ethernet port (C1)
Cage (socket for either 1 GbE copper SFP or
fiber SFP)
3—em0–RJ-45 (1000 Base-T) management
Ethernet port (C0)
The management panel consists of the following components:
•
Status LEDs
• ALM–Alarm
• Unlit indicates the switch is halted or that there is no alarm.
•
Red indicates a hardware fault, such as a power failure or a system shutdown due
to system over-heating.
• Amber indicates a major or minor alarm.
• SYS–System
• Unlit indicates the switch is powered off or halted.
•
Solid green indicates that Junos OS for QFX Series is loaded on the switch.
•
Blinking green indicates the switch is:
• A participating member in a Virtual Chassis.
• A participating leaf device in a Virtual Chassis Fabric (VCF).
•
A participating spine device in a VCF.
•
A Routing Engine Master in a VCF.
• A Routing Engine Backup in a VCF.
15 Copyright © 2014, Juniper Networks, Inc.
Chapter 2: Chassis