Juniper NetScreen-IDP 3.0, Quick Start Manual

Page: 5 / 32

QuickStart Guide, Juniper Networks NetScreen-IDP 3.0 | 5
The Installation Process
The installation process consists of 11 steps:
1. Choose a Deployment Mode. In this step, you choose a deployment
mode for the IDP system.
2. Install the IDP Management Server. In this step, you install the
Management Server software.
3. Connect to the IDP Appliance. In this step, you connect your system
to the IDP appliance using a serial or network connection.
4. Configure the IDP Sensor. In this step, you configure the IDP Sensor
software that is pre-installed on the IDP appliance.
5. Connect IDP to Your Network. In this step, you connect the IDP
appliance to your network.
6. Connect the NS-IDP-BYP (optional). In this step, you connect the
IDP Bypass Unit to your network and to the IDP appliance.
7. Install the User Interface. In this step, you install the User Interface
(UI).
8. Add Network Components. In this step, you add the IDP Sensor as a
Network Object in the IDP system.
9. Install a Security Policy. In this step, you install a Security Policy on
the IDP Sensor.
10. Run the Profiler . In this step, you configure and run the Profiler.
11. Update Your Attack Objects . In this step, you update your Attack
Object database to ensure that you are fully protected against the latest
attacks.
The NetScreen-IDP Installation CD includes the software required to install the
IDP Management Server, the IDP Sensor, and the User Interface for all IDP
appliances.
The NS-IDP-BYP is preconfigured to work with NetScreen-IDP 10, 100, 500, and
1000 appliances running IDP 2.1 or 3.0 Sensor software; no additional
configuration is required.