QuickStart Guide, Juniper Networks NetScreen-IDP 3.0 | 17
Step 4
C
ONFIGURE
THE
IDP S
ENSOR
In this step, you configure the NetScreen-IDP Sensor software that is pre-
installed on the IDP appliance to work with your network.
Using the Appliance Configuration Manager (ACM), a Web-based tool, follow the
on-screen instructions as the ACM wizard leads you through the six-section
configuration process.
To view the ACM online help, click the
icon in the upper right corner.
The table summarizes the information you should have available:
Note:
The ACM supports Mozilla 1.0.1 and IE 6.0 Web browsers. If the font
size is too small or difficult to read in your Mozilla Web browser, increase the
font size to 150%.
Note:
During the configuration process, you choose a One-Time Password
(OTP) and are given a VIN for your Sensor. Because you are prompted for this
information again in “Add Network Components” on page 28, you might want
to record the VIN.
Section
Configuration Information
Setup
• IDP Sensor host and domain name
• IDP Sensor root and admin passwords (default is
abc123
)
• Install Management Server Locally (Optional)
• Management Server password for the User Interface
Mode
• Deployment mode: sniffer, router, bridge, transparent,
or proxy-ARP
• Enable Bypass Unit (Optional)
• Enable/choose high availability solution
