QuickStart Guide, Juniper Networks NetScreen-IDP 3.0 | 13
For Solaris:
./mgtsvr_solaris_3_0.sh
The installation automatically begins.
8. When prompted, specify the directory that IDP uses to store the
Management Server data files.
9. When prompted, specify a password for the IDP Management Server
admin account. Confirm the password.
The installation proceeds automatically. Several messages appear to
confirm the installation progress. After the installation is complete, the
Management Server processes start automatically.
Management Server IP Address
During the Sensor configuration process, you must establish the communication
between the Management Server and the Sensor by providing the IP address of
the Management Server computer. For quick reference, write the Management
Server IP address in the table below:
When you have successfully installed the Management Server, proceed to
“Connect to the IDP Appliance” on page 14.
Note:
The admin account authenticates communication between the Management
Server and the User Interface (UI). You are asked for this password again when you
log in to the UI in “Install the User Interface” on page 26.
Management Server IP Address
