CHAPTER 3 Media Flow Manager Web-Based Interface
Media Flow Manager Administrator’s Guide
48
System Config
Copyright © 2010, Juniper Networks, Inc.
Figure 23
System Config > Web Page Detail (Web Proxy Configuration)
System Config > Users
View, remove, enable, disable, and add new users; plus change existing user passwords. See
username
for CLI details.
Active Users
View configured users:
•
Username
—Used for logins.
•
Full Name
—For the user, as configured.
•
Host
—What system this user is configured on.
•
Idle (seconds)
—Time since the last command execution of this user.
User Accounts
For each configured user account, view information or take action. See
Figure 24
for graphic.
•
User
—Used for logins.
•
Full Name
—For the user, as configured.
•
Capability
—The privilege level assigned this user. Capabilities are described below.
•
Enabled
—Whether or not this user account is enabled. User accounts are enabled by
default. Disabling an account makes it inactive (logins are disallowed) but does not delete
it from the system.
