System Config
47
Media Flow Manager Administrator’s Guide
CHAPTER 3 Media Flow Manager Web-Based Interface
Figure 22
System Config > Web Page Detail (Web UI Configuration)
Web Proxy Configuration
On the
System Config > Web
page, set parameters for the CMC Web-based interface when
proxied. See
Figure 23
for graphic.
•
Web Proxy address
—Specify a proxy to be used for any HTTP or FTP downloads.
•
Web Proxy port
—If no port is specified, the default is
1080
.
•
Authentication type
—Configure the type of authentication to be used with a Web proxy;
either
None
or
Basic
.
•
Basic auth username
—If your authenticating with Basic HTTP authentication, enter a
username and.
•
Basic auth password
for that user.
Click
Apply
to complete operation;
Cancel
to revert to existing configuration. Click
Save
at the
top of the page to make changes persistent across reboots.
