Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI Administrator'S Manual Download Page 66

Page: 66 / 156

CHAPTER 3 Media Flow Manager Web-Based Interface

Media Flow Manager Administrator’s Guide

System Config

Figure 54

System Config > License Page Detail (Add New License(s))
Click

Add License

to complete adding the new license.

Click

Save

at the top of the page to make changes persistent across reboots.

System Config > Reboot

Reboot

Shutdown

the appliance. See

Figure 55

for graphic.

A reboot brings up the same configuration that was last active.

Figure 55

System Config > Reboot Page Detail

System Config > Upgrade

Use this page to install upgrades. See

image

for CLI details.

Installed Images

View installed images and

Switch Boot Partition

. You may need to switch the boot partition if

the image you want to install is in the other partition. See

Figure 56

for graphic.

Click

Save

at the top of the page to make changes persistent across reboots.

Summary of Contents for MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI





















































































































































Search results

Summary of Contents for MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI

Reviews:

Related manuals for MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI

Brands by name

Popular brands

Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI, Administrator'S Manual

Search results

Summary of Contents for MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI

Reviews:

Related manuals for MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI

Brands by name

Popular brands