JunosE 11.0.2 Release Notes
102
E120 and E320 System Maximums
Policy and QoS Maximums
Table 12 lists policy and QoS maximums for the E120 router and the E320 router.
The following notes are referred to in Table 12:
1.
For more information about system resource requirements for nodes, queues,
and shadow nodes, see
JunosE Quality of Service Configuration Guide,
Chapter 15, QoS Profile Overview
. QoS is supported on all E Series line modules
except for the ES2 10G Uplink LM.
2.
For all line modules the maximum number of IPv4 or IPv6 or VLAN policy
attachments is determined by the maximum number of interfaces multiplied
by the number of attachment resources that are currently used. Attachment
resources are only used when you attach the policy.
The line modules support policy attachments based on the following
considerations:
IPv4—Up to 2 ingress policy attachments and 1 egress policy attachment
Secure policy—Up to 1 ingress policy attachment and 1 egress policy
attachment (ES2 10G LM and ES2 10G ADV LM only)
VLANs—Up to 1 ingress policy attachment and 1 egress policy attachment
3.
Secure policies are not supported on the ES2 10G Uplink LM. IPv6 secure
policies are not supported on the ES2 10G LM.
Table 12: Policy and QoS Maximums
Feature
E120
E320
QoS queues per line module
(See Note 1 on page 102.)
128,000
128,000
QoS profiles configurable per chassis
1000
1000
QoS profile attachments per chassis
96,000
96,000
QoS profile attachments per line module
ES2 4G LM
16,000
16,000
ES2 10G LM
16,000
16,000
ES2 10G ADV LM
32,000
32,000
QoS scheduler nodes per line module
64,000
64,000
QoS shapers per line module
64,000
64,000
Classification rules per policy
512
512
