Juniper JUNOSE 11.0.2 RELEASE NOTES Release Note Download Page 18

Page: 18 / 118

JunosE 11.0.2 Release Notes

Release Software Protocols

Stateful SRP Switchover (High Availability)

Stateful SRP Switchover for Certain Applications

The stateful SRP switchover feature has not been qualified for the following
applications:

Release Software Protocols

The following list identifies the major software protocols supported in this release.
For detailed information about any protocol, see the configuration guides.

Core Routing Stack

Internet Protocol (IP) version 4 and version 6

Transmission Control Protocol (TCP) for IPv4

User Datagram Protocol (UDP) for IPv4 and IPv6

Layer 2 Protocols

Asynchronous Transfer Mode (ATM)

Bridged Ethernet

Bridged IP

Cisco High-Level Data Link Control (Cisco HDLC)

Ethernet

Extensible Authentication Protocol (EAP)

Frame Relay

Layer 2 Tunneling Protocol (L2TP)

Multilink Frame Relay (MLFR)

Multilink Point-to-Point Protocol (MLPPP)

Packet over SONET (POS)

Point-to-Point Protocol (PPP)

PPP over Ethernet (PPPoE)

Transparent bridging

Remote Access

DHCP proxy client

L2TP dialout

Summary of Contents for JUNOSE 11.0.2 RELEASE NOTES























































































































Search results

Summary of Contents for JUNOSE 11.0.2 RELEASE NOTES

Reviews:

Related manuals for JUNOSE 11.0.2 RELEASE NOTES

Brands by name

Popular brands

Juniper JUNOSE 11.0.2 RELEASE NOTES, Release Note

Search results

Summary of Contents for JUNOSE 11.0.2 RELEASE NOTES

Reviews:

Related manuals for JUNOSE 11.0.2 RELEASE NOTES

Brands by name

Popular brands