501
1
838
6 GB
E 36
Setting down loads
– Carefully approach the storage
position with the truck.
f
Before the load can be set down the
driver must verify that the storage
position is suited for the load
(dimensions and carrying capacity).
– Release foot switch.
– Lift the load-carrying unit as far until
the load can be inserted into the
storage position without colliding.
– Carefully push the load into the
storage position.
– Sensitively lower the load-carrying
unit until the fork arms are clear off the
load.
m
Avoid setting down the load heavily, in
order not to damage load and load-
carrying unit.
– Carefully pull load-carrying unit out of
the load.
– Fully lower the load-carrying unit.
4.5
Lifting height preselection
To pick up or set down loads at preselected storage locations, the truck must be
adjusted to the warehouse facilities. The work required for this purpose may only be
carried out by customer service.
Storage location recognition (zones)
The zones are entered via number keys or input keys F1 - F7.
Picking up or setting down load in preselected storage locations with height
preselection:
– Drive truck into the corresponding narrow aisle
– Enter the shelf number.
The shelf number is entered via the number keys.
The shelf number can be entered as a single digit (1- 9) or two digits (01 - 64).
The entry can be deleted with the “CE” key.
If height “0” is entered for the selected shelf, the height preselection is not active.
501
1
838
6 GB
E 36
Setting down loads
– Carefully approach the storage
position with the truck.
f
Before the load can be set down the
driver must verify that the storage
position is suited for the load
(dimensions and carrying capacity).
– Release foot switch.
– Lift the load-carrying unit as far until
the load can be inserted into the
storage position without colliding.
– Carefully push the load into the
storage position.
– Sensitively lower the load-carrying
unit until the fork arms are clear off the
load.
m
Avoid setting down the load heavily, in
order not to damage load and load-
carrying unit.
– Carefully pull load-carrying unit out of
the load.
– Fully lower the load-carrying unit.
4.5
Lifting height preselection
To pick up or set down loads at preselected storage locations, the truck must be
adjusted to the warehouse facilities. The work required for this purpose may only be
carried out by customer service.
Storage location recognition (zones)
The zones are entered via number keys or input keys F1 - F7.
Picking up or setting down load in preselected storage locations with height
preselection:
– Drive truck into the corresponding narrow aisle
– Enter the shelf number.
The shelf number is entered via the number keys.
The shelf number can be entered as a single digit (1- 9) or two digits (01 - 64).
The entry can be deleted with the “CE” key.
If height “0” is entered for the selected shelf, the height preselection is not active.
Summary of Contents for ETX ac 125
