Jungheinrich ETX ac 125, Operating Instructions Manual

Page: 58 / 89

E 29
501
1
838
6 GB
The inductive forced steering takes over
steering of the truck and turns it to the
guide wire.
After the truck is exactly tracking the
guide wire the tracking-in procedure is
completed. The display (36) changes to
“Wire-guided”. The tracking-in signal is
no longer sounded. The truck is now
force-guided.
The maximum travel speed is enabled.
To leave the guide wire the pushbutton
(23) for inductive forced steering must
be actuated.
f
Switching over to manual steering may only be performed when the entire truck has
left the rack aisle.
If t during inductive guidance of the truck the guiding antenna leaves the predefined
level area of the guide wire, an emergency stop is initiated immediately.
23
36
E 29
501
1
838
6 GB
The inductive forced steering takes over
steering of the truck and turns it to the
guide wire.
After the truck is exactly tracking the
guide wire the tracking-in procedure is
completed. The display (36) changes to
“Wire-guided”. The tracking-in signal is
no longer sounded. The truck is now
force-guided.
The maximum travel speed is enabled.
To leave the guide wire the pushbutton
(23) for inductive forced steering must
be actuated.
f
Switching over to manual steering may only be performed when the entire truck has
left the rack aisle.
If t during inductive guidance of the truck the guiding antenna leaves the predefined
level area of the guide wire, an emergency stop is initiated immediately.
23
36