Jungheinrich ETX ac 125, Operating Instructions Manual

Page: 63 / 89

501
1
838
6 GB
E 34
Picking up a load with swivel/traverse fork from the front
– Swivel the swivel/traverse fork 90°
away from the transport position and
traverse to the centre axis of the truck.
A
The swivel/traverse fork is now
positioned in travel direction.
– Fully lower the swivel/traverse fork
respectively lift to the proper height
with respect to the load, so that the
fork arms can be inserted under the
load without damaging it.
f
Lifting person is prohibited.
– Carefully insert the fork arms under
the load until it makes contact with the
back of the fork.
f
The fork arms must be inserted into the
load with their full length.
– Release foot switch.
– Lift the swivel/traverse fork slightly so
that the load is clear off the ground.
– Step on the foot switch.
– Drive the truck carefully in drive
direction only as far until the load is
free.
This operating mode is only allowed at
the stack!
f
Make sure that nobody steps under the
lifted load.
– Release foot switch.
– Lower the load.
– Move the swivel/traverse fork in
transport position.
A
The swivel/traverse fork must be
swivelled crossways to the travel
direction and must be positioned in left
respectively right transport position.
The picked up load can now be
transported.
501
1
838
6 GB
E 34
Picking up a load with swivel/traverse fork from the front
– Swivel the swivel/traverse fork 90°
away from the transport position and
traverse to the centre axis of the truck.
A
The swivel/traverse fork is now
positioned in travel direction.
– Fully lower the swivel/traverse fork
respectively lift to the proper height
with respect to the load, so that the
fork arms can be inserted under the
load without damaging it.
f
Lifting person is prohibited.
– Carefully insert the fork arms under
the load until it makes contact with the
back of the fork.
f
The fork arms must be inserted into the
load with their full length.
– Release foot switch.
– Lift the swivel/traverse fork slightly so
that the load is clear off the ground.
– Step on the foot switch.
– Drive the truck carefully in drive
direction only as far until the load is
free.
This operating mode is only allowed at
the stack!
f
Make sure that nobody steps under the
lifted load.
– Release foot switch.
– Lower the load.
– Move the swivel/traverse fork in
transport position.
A
The swivel/traverse fork must be
swivelled crossways to the travel
direction and must be positioned in left
respectively right transport position.
The picked up load can now be
transported.