E 35
501
1
838
6 GB
Picking up and setting down a load in the narrow aisle
f
In narrow aisles the operator must pay
special attention. The narrow aisle must
not be entered when persons or another
truck is in the narrow aisle. Also during
the stacking procedure the driver must
make sure that persons or trucks do not
enter the narrow aisle. If this is the case
the truck must be stopped immediately
and a warning signal must be issued.
– Position the truck horizontally and
vertically directly in front of the rack
shelf so that it does not touch the rack
with the load or load-carrying unit.
– Pick up or set down the load (refer to
section “Picking up a load sideways”
respectively “Setting down a load”.
f
Special care must be taken when
working at the first rack shelves, as the
truck is partly located outside the narrow
aisle and persons and trucks moving in
the travel range may be injured resp.
damaged.
Transporting loads
A
Observe clearance heights and width at doors and between racks.
f
If the load is stacked high and obstructs the view, a second person must be present
for guiding.
– Sensitively accelerate the truck and
always be prepared to apply the
brakes.
f
Adapt the travel speed to the condition of
the travel path and to the transported
load. Watch the traffic at intersections
and passages and use the help of a
second person when negotiating unclear
sections.
E 35
501
1
838
6 GB
Picking up and setting down a load in the narrow aisle
f
In narrow aisles the operator must pay
special attention. The narrow aisle must
not be entered when persons or another
truck is in the narrow aisle. Also during
the stacking procedure the driver must
make sure that persons or trucks do not
enter the narrow aisle. If this is the case
the truck must be stopped immediately
and a warning signal must be issued.
– Position the truck horizontally and
vertically directly in front of the rack
shelf so that it does not touch the rack
with the load or load-carrying unit.
– Pick up or set down the load (refer to
section “Picking up a load sideways”
respectively “Setting down a load”.
f
Special care must be taken when
working at the first rack shelves, as the
truck is partly located outside the narrow
aisle and persons and trucks moving in
the travel range may be injured resp.
damaged.
Transporting loads
A
Observe clearance heights and width at doors and between racks.
f
If the load is stacked high and obstructs the view, a second person must be present
for guiding.
– Sensitively accelerate the truck and
always be prepared to apply the
brakes.
f
Adapt the travel speed to the condition of
the travel path and to the transported
load. Watch the traffic at intersections
and passages and use the help of a
second person when negotiating unclear
sections.
Summary of Contents for ETX ac 125
