Jungheinrich EKS 110, Operating Instructions Manual

Page: 36 / 121

33
03
.0
9 EN
8 Pedestrian mode lift
button
o
Pedestrian mode optional feature: Lifts the
operator platform and forks.
9 Drive direction pedes-
trian touch mode
o
Pedestrian mode optional feature, travel is
continued as operator walks beside in drive
direction (slow travel).
10 Fork direction pedes-
trian touch mode
o
Pedestrian mode optional feature, travel is
continued as operator walks beside in forks
direction (slow travel).
11 Driver's display
t
Displays important travel and lift parameters;
selection and display of steering modes, warn-
ings, incorrect operation notes and service dis-
plays.
12 Emergency Disconnect
t
The circuit is interrupted, all electrical functions
are cut out and the truck automatically brakes.
13 Controller
t
Controls the travel direction and speed.
o
2nd control station
14 Steering wheel
t
Steers the truck.
15 Button:
Two-hand operation
o
Releases lifting and travel when pressed (in rail
guidance mode with aisle recognition).
16 Indicator
o
End of aisle safety device optional feature:
Indicates reduced travel speed
17 Reset button
o
End of aisle safety device optional feature:
Releases normal travel speed.
18 Key switch and key
t
Switches control voltage on and off. Removing
the key prevents the truck from being switched
on by unauthorised personnel.
CANCODE keypad
o
Code lock, replaces the key switch. Switches
control current on and off. Enables truck func-
tions. Change access codes.
ISM access module
o
Replaces the key switch. Checks the card (or
the transponder). Enables truck functions. Tim-
eout monitoring. Lists the truck users (shifts)
and saves them onto the card. Operational
data acquisition.
19 Emergency Disconnect
o
Pedestrian mode optional feature: Disconnects
the supply current and deactivates all electrical
functions, causing the truck to brake automati-
cally.
t
Standard equipment
o
Optional equipment
Item Control / Display Function
33
03
.0
9 EN
8 Pedestrian mode lift
button
o
Pedestrian mode optional feature: Lifts the
operator platform and forks.
9 Drive direction pedes-
trian touch mode
o
Pedestrian mode optional feature, travel is
continued as operator walks beside in drive
direction (slow travel).
10 Fork direction pedes-
trian touch mode
o
Pedestrian mode optional feature, travel is
continued as operator walks beside in forks
direction (slow travel).
11 Driver's display
t
Displays important travel and lift parameters;
selection and display of steering modes, warn-
ings, incorrect operation notes and service dis-
plays.
12 Emergency Disconnect
t
The circuit is interrupted, all electrical functions
are cut out and the truck automatically brakes.
13 Controller
t
Controls the travel direction and speed.
o
2nd control station
14 Steering wheel
t
Steers the truck.
15 Button:
Two-hand operation
o
Releases lifting and travel when pressed (in rail
guidance mode with aisle recognition).
16 Indicator
o
End of aisle safety device optional feature:
Indicates reduced travel speed
17 Reset button
o
End of aisle safety device optional feature:
Releases normal travel speed.
18 Key switch and key
t
Switches control voltage on and off. Removing
the key prevents the truck from being switched
on by unauthorised personnel.
CANCODE keypad
o
Code lock, replaces the key switch. Switches
control current on and off. Enables truck func-
tions. Change access codes.
ISM access module
o
Replaces the key switch. Checks the card (or
the transponder). Enables truck functions. Tim-
eout monitoring. Lists the truck users (shifts)
and saves them onto the card. Operational
data acquisition.
19 Emergency Disconnect
o
Pedestrian mode optional feature: Disconnects
the supply current and deactivates all electrical
functions, causing the truck to brake automati-
cally.
t
Standard equipment
o
Optional equipment
Item Control / Display Function