71
03
.0
9 EN
8
Changing truck settings
Z
Changing the truck settings will affect the behaviour of the truck. This must be taken
into account when starting up the truck. Settings may only be changed when the
truck is stationary and not lifting.
The driver’s display can also be used to change certain truck parameters (accelera-
tion, coasting brake, reverse braking, drive direction speed, fork direction speed and
lift speed) and hence the truck’s characteristics.
Trucks with driver’s display and key switch
For trucks with a key switch, use the grey service spanner to access the travel param-
eters.
Trucks with driver’s display and CANCODE (
o
)
Before entering the SERVICE MENU / PARAMETER MENU you will be asked for
your pin. Trucks with CANCODE (
o
) are factory set with the PIN 2580. Enter your
PIN to switch on the truck. Before entering the SERVICE MENU / PARAMETER
MENU you will no longer be asked for your PIN. The parameter settings are saved
under the PIN. You can set 15 different parameters (change of driver or change of
program). To select other parameter settings, the truck must log off and on again or
be switched off and on again. Enter the next PIN. Changes to the service mode may
only be made by the manufacturer’s service department.
71
03
.0
9 EN
8
Changing truck settings
Z
Changing the truck settings will affect the behaviour of the truck. This must be taken
into account when starting up the truck. Settings may only be changed when the
truck is stationary and not lifting.
The driver’s display can also be used to change certain truck parameters (accelera-
tion, coasting brake, reverse braking, drive direction speed, fork direction speed and
lift speed) and hence the truck’s characteristics.
Trucks with driver’s display and key switch
For trucks with a key switch, use the grey service spanner to access the travel param-
eters.
Trucks with driver’s display and CANCODE (
o
)
Before entering the SERVICE MENU / PARAMETER MENU you will be asked for
your pin. Trucks with CANCODE (
o
) are factory set with the PIN 2580. Enter your
PIN to switch on the truck. Before entering the SERVICE MENU / PARAMETER
MENU you will no longer be asked for your PIN. The parameter settings are saved
under the PIN. You can set 15 different parameters (change of driver or change of
program). To select other parameter settings, the truck must log off and on again or
be switched off and on again. Enter the next PIN. Changes to the service mode may
only be made by the manufacturer’s service department.
Summary of Contents for EKS 110
