Jungheinrich EKS 110, Operating Instructions Manual

Page: 10 / 121

7
03
.0
9 EN
A Correct Use and Application
WARNING!
The “Guidelines for the Correct Use and Application of Industrial Trucks” (VDMA) are
supplied with the truck. The guidelines form part of these operating instructions and
must be observed. National regulations apply in full.
The truck described in the present operating instructions is an industrial truck de-
signed for lifting and transporting loads.
It must be used, operated and serviced in accordance with the present instructions.
Any other type of use is beyond the scope of application and can result in damage to
personnel, the industrial truck or property. In particular, avoid overloading the truck
with loads which are too heavy or placed on one side. The data plate attached to the
truck or the load chart are binding for the maximum load capacity. The industrial truck
must not be used in fire or explosion endangered areas, or areas threatened by cor-
rosion or excessive dust. Furthermore, the truck must not be operated in the vicinity
of unprotected active components of electrical systems.
Proprietor responsibilities
For the purposes of the present operating instructions the “proprietor” is defined as
any natural or legal person who either uses the industrial truck himself, or on whose
behalf it is used. In special cases (e.g. leasing or renting) the proprietor is considered
the person who, in accordance with existing contractual agreements between the
owner and user of the industrial truck, is charged with operational duties.
The proprietor must ensure that the industrial truck is used only for the purpose for
which it is intended and that there is no danger to life and limb of the user and third
parties. Furthermore, accident prevention regulations, safety regulations and operat-
ing, servicing and repair guidelines must be followed. The owner must ensure that all
users have read and understood these operating instructions.
WARNING!
Failure to comply with the operating instructions shall invalidate the warranty. The
same applies if improper work is carried out on the truck by the customer or third par-
ties without the permission of the manufacturer.
Attaching accessories
The attachment or installation of additional equipment which affects or supplements
the performance of the industrial truck requires the written permission of the manu-
facturer. In some cases, local authority approval may be required.
Local authority approval does not however constitute the manufacturer’s approval.
7
03
.0
9 EN
A Correct Use and Application
WARNING!
The “Guidelines for the Correct Use and Application of Industrial Trucks” (VDMA) are
supplied with the truck. The guidelines form part of these operating instructions and
must be observed. National regulations apply in full.
The truck described in the present operating instructions is an industrial truck de-
signed for lifting and transporting loads.
It must be used, operated and serviced in accordance with the present instructions.
Any other type of use is beyond the scope of application and can result in damage to
personnel, the industrial truck or property. In particular, avoid overloading the truck
with loads which are too heavy or placed on one side. The data plate attached to the
truck or the load chart are binding for the maximum load capacity. The industrial truck
must not be used in fire or explosion endangered areas, or areas threatened by cor-
rosion or excessive dust. Furthermore, the truck must not be operated in the vicinity
of unprotected active components of electrical systems.
Proprietor responsibilities
For the purposes of the present operating instructions the “proprietor” is defined as
any natural or legal person who either uses the industrial truck himself, or on whose
behalf it is used. In special cases (e.g. leasing or renting) the proprietor is considered
the person who, in accordance with existing contractual agreements between the
owner and user of the industrial truck, is charged with operational duties.
The proprietor must ensure that the industrial truck is used only for the purpose for
which it is intended and that there is no danger to life and limb of the user and third
parties. Furthermore, accident prevention regulations, safety regulations and operat-
ing, servicing and repair guidelines must be followed. The owner must ensure that all
users have read and understood these operating instructions.
WARNING!
Failure to comply with the operating instructions shall invalidate the warranty. The
same applies if improper work is carried out on the truck by the customer or third par-
ties without the permission of the manufacturer.
Attaching accessories
The attachment or installation of additional equipment which affects or supplements
the performance of the industrial truck requires the written permission of the manu-
facturer. In some cases, local authority approval may be required.
Local authority approval does not however constitute the manufacturer’s approval.